Specifications

Spec. No. FB71, 3/9
SERIES
Clutch
BASIC CHASSIS SPECIFICATIONS
Model C2W26
Type Hydraulic control, diaphragm spring, single dry plate
Facing material Woven (asbestos free)
Facing outside dia. 260 mm (10. 2 in.)
Facing thickness 3.5 mm (0. 14 in.)
Total frictional area 304 sq.cm x 2 (47.1 sq.in. x 2 )
FB71AB8
Model M015S5
Type 5 forward and 1 reverse speed, 1st to 5th synchromesh, Rev. constantmesh gears
Gear ratios 4.733-2.753-1.490-1.000-0.839, Rev. 4.733
Control In-dash gear shift, mechanical remote control
Recommended oil grade API GL-3, SAE80
Transmission
Model P2
Size Pipe outside dia. 63.5 mm (2.50 in.), Thickness 2.6mm (0.10 in.)
Type Tubular, forged steel ends
Joints Universal joints with needle roller bearing
Propeller Shaft
Model R015T
Type Full floating type
Capacity 2,400 kg (5,290 lb)
Final reduction gear Single reduction, hypoid gear
Model D1H
Ratio 5.285
Recommended oil grade API GL-5, SAE90
Rear Axle
Model F100T
Type Reverse Elliot, "Ι" beam
Capacity 1,700 kg (3,750 lb)
Front Axle
Tire size
Front 7.00-15-16PR
11 11 1
Tire size Rear 7.00-15-10PR 11
Tread pattern Rib
Disc wheel size
Type-offset-thickness
15 x 5.50F
-
25
-
4.5t, 6 studs, 2 pieces
Tires and Disc Wheels Single front, single rear
Type Ball-nut type. Telescopic and tilt steering column with steering lock
Gear ratio 28 ~ 33 : 1
Steering wheel dia 400 mm (15.7 in.)
Steering System
Actuation Hydraulic with vacuum servo assistance, dual circuit
Size Drum dia. x Lining width x Lining thickness
Front 279 mm x 60 mm x 5.5 mm (11.0 in. x 2.36 in. x 0.22 in.)
Rear 300 mm x 60 mm x 7.0 mm (11.0 in. x 2.36 in. x 0.28 in.)
Total lining area 1,412 sq.cm (218.9 sq.in.)
Service Brake
Actuation Internal expanding type on propeller shaft at rear of transmission
Total lining area 130 sq.cm (20.2 sq.in.)
Parking Brake
Vacuum reservoir 4 lits. (dm
3
) (0.88 Imp.gals. or 1.06 U.S.gals.)
Size
Drum dia. x Lining width x Lining thickness
180 mm x 35 mm x 5.3 mm (7.1 in. x 1.38 in. x 0.21 in. )