Specifications

Spec. No. FB71, 6/9
STANDARD BARO. PRESSURE TEMP. OF INLET AIR ACCESSORIES*
JIS JIS D1004 760 mmHg (101.3 kPa), dry 15.0 °C Fan**, Air cleaner
Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0
°C
exhaust system of vehicle***
SAE, Gross SAE J1349 742.6 mmHg (99 kPa), dry 25.0 °C ──
Cooling System Pressure type with thermostat, forced circulation by centrifugal pump
Coolant capacity 11 lits. (dm
3
) (2.42 Imp.gals. or 2.91 U.S.gals.)
Fan P. P. blade
Fuel System
Fuel filter Full-flow filter with paper element, throwaway type
Injection pump Bosch VE type
Governor All-speed mechanical type
Fuel Diesel fuel oil (cetane number 45 and more)
Air Cleaner Dry paper element
Alternator 12 Volt, 75 Amp.
Starter DC 12Volt, 2.2 kW
Vacuum Pump Vane type
Displacement 60 cc (3.7 cu.in.)
Engine Dust-proof Includes dust-proof alternator, crankcase breather and dipstick
Caution Plate English
BASIC ENGINE SPECIFICATIONS
CHASSIS MODEL
Engine Model MITSUBISHI FUSO 4M40-0A
Type 4 stroke-cycle, water-cooled diesel engine with swirl chamber
No. of Cylinders 4 in line
Bore x Stroke 95 mm x 100 mm (3.74 in. x 3.94 in.)
Piston Displacement 2.835 L (173.1 cu. in.)
Compression Ratio 21 : 1
Max. Output
69 kW (94 PS) (JIS)
66 kW (90 PS) (DIN)
64 kW (86 hp) (SAE, Gross)
at 4,000 rpm (66.7 r/s) (1)
FB71AB8
191 N·m (19.5 kgf·m, 141 lb·ft ) (JIS)
188 N·m (19.2 kgf·m, 139 lb·ft ) (DIN)
Max. Torque
179 N·m (18.3 kgf·m, 132 lb·ft ) (SAE, Gross)
at 2,000 rpm (33.3 r/s) (1)
Weight 260 kg (573 lb) in wet
Oil System
Oil filter Full-flow filter with paper element, throwaway type
Oil cooler Water-cooled
Oil pan capacity 6.0 lits. (dm
3
) (1.32 Imp.gals. or 1.59 U.S.gals.)
Recommended oil grade API service classification CC or CD
ANNOTATION
(1) Max. speed of 4M40
-
0A engine is 4,200 rpm (70.0 r/s).
REMARKS
(1) Output and torque represent performance of run-in engine operating under the standard ambient conditions and
accessories specified below.
(2) Rated output is guaranteed within 5% under the standard ambient conditions.
* Other than built-in accessories essential to engine operation.
** 4M40-0A, 450 mm dia. 10 blades, P. P., fan ratio 1.12
*** Output (DIN) is based on the assumptions that max. inlet restriction is 350 mm H
2
O (3.4 kPa) and max. exhaust back
pressure is 150 mmHg (19.9 kPa).