Specifications

Spec. No. FE85C, 3/9
Clutch
BASIC CHASSIS SPECIFICATIONS
SERIES
Model C4W30
Type Hydraulic control, diaphragm spring, single dry plate
Facing material Woven (asbestos free)
Facing outside dia. 300 mm (11. 8 in.)
Facing thickness 4.0 mm (0.15 in.)
Total frictional area 423 sq.cm x 2 (65.6 sq.in. x 2)
FE85C-Z
Model M035S5
Type 5 forward and 1 reverse speed, 2nd to 5th synchromesh, 1st and Rev. constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Control In-dash gear shift, mechanical remote control
Recommended oil grade API GL–3, SAE80
Transmission
Model P3
Size Pipe outside dia. 82.6 mm (3.25 in.), Thickness 2.3 mm (0.09 in.)
Type Tubular, forged steel ends with center bearing
Joints Universal joints with needle roller bearing
Propeller Shaft
Model R040T
Type Full floating type
Capacity 6,650 kg (14,660 lb)
Final reduction gear Single reduction, hypoid gear
Model D040H
Ratio 6.166
Recommended oil grade API GL-5, SAE90
Rear Axle
Model F350T
Type Reverse Elliot, "Ι" beam
Capacity 3,100 kg (6,835 lb)
Front Axle
Tire size 7.50-16-14PR
Tread pattern Rib
Disc wheel size
Type-offset-thickness
16 x 6.00GS
-
127
-
9t, 6 studs, 2 pieces
Tires and Disc Wheels Single front, dual rear
Type
Ball-nut type with integral type hydraulic power booster.
Telescopic and tilt steering column with steering lock
Gear ratio 22.7 : 1
Steering wheel dia 400 mm (15.7 in.)
Steering System
Actuation Hydraulic with oil servo assistance, dual circuit
Size Drum dia. x Lining width x Lining thickness
Front 320 mm x 110 mm x 11 mm (12.6 in. x 4.33 in. x 0.43 in.)
Rear 320 mm x 110 mm x 11 mm (12.6 in. x 4.33 in. x 0.43 in.)
Total lining area 2,210 sq.cm (342.5 sq.in.)
Vacuum reservoir
-
Service Brake
Actuation Internal expanding type on propeller shaft at rear of transmission
Total lining area 186 sq.cm (28.8 sq.in.)
Exhaust Brake Vacuum operated, butterfly valve type
Parking Brake
Size
Drum dia. x Lining width x Lining thickness
190 mm x 45 mm x 4 mm (7.48 in. x 1.77 in. x 0.16 in.)