Specifications

Spec. No. FG83, 3/9
BASIC CHASSIS SPECIFICATIONS
SERIES
Clutch
Model C3W28
Type Hydraulic control, diaphragm spring, single dry plate
Facing material Woven (asbestos free)
Facing outside dia. 275 mm (10.8 in.)
Facing thickness 3.8 mm (0.15 in.)
Total frictional area 353 sq.cm x 2 (54.7 sq.in. x 2)
FG83P
Transmission
Model M035S5
Type 5 forward and 1 reverse speed, 2nd to 5th synchromesh, 1st and Rev.constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Control In-dash gear shift, mechanical remote control
Recommended oil grade API GL-3, SAE80
Transfer
Model TF3
Type 2 speed, constantmesh gears
Gear ratios Low: 1.987, High: 1.090
Control Switch control vacuum assistant
Recommended oil grade API GL-3, SAE90
Rear Axle
Model R030T
Type Full floating type
Capacity 3,600 kg (7,935 lb)
Final reduction gear Single reduction, hypoid gear
Model D3H
Ratio 6.166
Recommended oil grade API GL-5, SAE90
Front Axle
Model F200TW
Type Full floating type with constant velocity universal joints
Capacity
Final reduction gear Single reduction, hypoid gear
Model D1H
Ratio 6.166
Recommended oil grade API GL-5, SAE90
Tires and Disc Wheels Single front, dual rear
Tire size 7.50-16-10PR
Tread pattern Rib-Lug
Disc wheel size
Type-offset-thickness
16 x 6.00 GS-127-9t, 6 studs, 2 pieces
Steering System
Ball-nut type with integral type hydraulic power booster.
Telescopic and tilt steering column with steering lock
Gear ratio 22.6 : 1
Steering wheel dia. 400 mm (15.7 in.)
Service Brake
Actuation Hydraulic with vacuum servo assistance, dual circuit
Size Drum dia. x Lining width x Lining thickness
Front 320 mm x 75 mm x 10 mm (12.6 in. x 2.95 in. x 0.39 in.)
Rear 320 mm x 75 mm x 10 mm (12.6 in. x 2.95 in. x 0.39 in.)
Total lining area 2,088 sq.cm (323.6 sq.in.)
Vacuum reservoir 4 lits.
(dm
3
)
(0.88 Imp.gals. or 1.06 U.S.gals.)
Parking Brake
Actuation Internal expanding type on propeller shaft at rear of transfer
Total lining area 186 sq.cm (28.8 sq.in.)
Size
Drum dia. x Lining width x Lining thickness
190 mm x 45 mm x 4 mm (7.48 in. x 1.77 in. x 0.16 in.)
2,500 kg (5,510 lb)
Propeller Shaft
Model Front: P2, Rear: P3
Size Pipe outside dia. 82.6 mm (3.25 in.), Thickness 3.5 mm (0.14 in.)
FG83PC6: Tubular, forged steel ends
FG83PE6/FG83PE6W: Tubular, forged steel ends with center bearing
Joints Universal joints with needle roller bearing
Type
Type