Specifications

Floor
Main sill height x width x thickness
Cross sill height x width
Floor board thickness
Floor frame
Guard Frame
Outside post thickness
Upper rail thickness
Horizontal rail thickness
Vertical pillar thickness
Header panel thickness
Side & Rear Gate
Top rail thickness
Side post thickness
Bottom rail thickness
Board & panel thickness
Accessories
Rope hook diameter
Rear fender thickness
Side gate support
Engine
Model
Type
No. of cylinders
Bore x stroke
Piston displacement
Max. output (JIS)
Max. torque (JIS)
Alternator
Air cleaner
Clutch
Facing material, diameter
Transmission
Model
Type
Gear ratios
Front Axle
Rear Axle
Final reduction gear
Model
Ratio
Tires and Disc Wheels
Tire size
Tread pattern
Disc wheel size
Steering
Suspensions
span x width x thickness
Front
–No. of leaves
Rear
span x width x thickness
Main
–No. of leaves
Helper
Brakes
Service
Parking
Exhaust
Exhaust System
Tail pipe
Frame
Electrical System
Batteries
Fuel Tank
Paint
Steel pipe
Plywood
Plywood
Form-rolled steel
Pressed steel
Bended steel
Bended steel
Bended steel
Plywood
Form-rolled steel
Pressed steel
Form-rolled steel
Plywood overlaid with steel metal
Steel rod
Plastic (P.P.)
1 pair
90 mm x 40 mm x 2.3 mm (3.54 in. x 1.57 in. x 0.09 in.)
93 mm x 40 mm or 35 mm (3.66 in. x 1.57 in. or 1.38 in.)
14 mm (0.55 in.)
2.3 mm (0.09 in.)
3.2 mm (0.13 in.)
3.2 mm (0.13 in.)
2.3 mm (0.09 in.)
1.4 mm (0.06 in.)
11 mm (0.43 in.)
2.0 mm (0.08 in.)
1.6 mm (0.06 in.)
1.6 mm (0.06 in.)
13.3 mm (0.52 in.)
12.7 mmφ (Dia. 0.50 in.)
3.0 mm (0.12 in.)
Wooden cargo
Spec. No. FE85P-C, 2/2
MITSUBISHI FUSO 4D34-2A
4 stroke-cycle, water-cooled direct injection diesel engine
4 in line
104 mm x 115 mm (4.09 in. x 4.53 in.)
3.907 L (238.4 cu.in.)
89 kW (120 PS) / 3,200 rpm
295 N·m (30.0 kgf·m, 217 lb·ft) / 1,800 rpm
24 Volt, AC, 50 Amp.
Dry paper element type with snorkel
Hydraulic control, diaphragm spring, single dry plate
Woven (asbestos free), 300 mm (11.8 in.)
M035S5
5 forward and 1 reverse speed,
2nd to 5th synchromesh, 1st and Rev. constantmesh gears
5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Reverse Elliot, "I" beam
Full floating type
Single reduction, hypoid gear
D035H
6.166
Single front, dual rear
7.50-16-10PR
Rib
16 x 6.00GS-127-9t, 6 studs, 2 pieces
Ball-nut type. Telescopic and tilt steering column with steering lock
Semi-elliptic, laminated leaf springs
1,200 mm x 70 mm x 11 mm-5 (47.2 in. x 2.76 in. x 0.43 in.)
Semi-elliptic, laminated leaf springs
10 mm-1 0.39 in.
1,250 mm x 70 mm x 49.2 in. x 2.76 in. x
11 mm-5 0.43 in.
9 mm-2 0.35 in.
990 mm x 70 mm x 10 mm-4 39.0 in. x 2.76 in. x 0.39 in.
9 mm-1 0.35 in.
Hydraulic with vacuum servo assistance, dual circuit
Internal expanding type on propeller shaft at rear of transmission
Vacuum operated, butterfly valve type
Conventional (horizontal) type muffler
Drop tail type, blowing to chassis rearward
Parallel, tapered channel section with reinforcement and crossmembers
24 Volt, regulated control
12 Volt x 2, 65 Ah (234 kC) at 20 hr rate (75D26L)
52 Ah (187 kC) at 5 hr rate (75D26L)
100 lits. (dm
3
) (22.0 lmp.gals. or 26.4 U.S.gals.)
Finish coat, Natural White
FE85P SERIES CARGO BODY SPECIFICATIONS
FE85P SERIES CHASSIS SPECIFICATIONS
()
ANNOTATION
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
()
BODY TYPE