Repair Manual

OIL PAN AND TIMING CHAIN CASE
ENGINE OVERHAUL <4A9>
11B-21
REMOVAL SERVICE POINTS
<<A>> OIL FILTER REMOVAL
AK401774
Oil filter wrench
AC
Remove the oil filter using an oil filter wrench (com-
mercially available).
<<B>> OIL PAN REMOVAL
AK304920AB
MD998727
1. Remove the oil pan retaining bolts.
2. Knock the special tool Oil pan cutter (MD998727)
between the oil pan and the cylinder block.
INSTALLATION SERVICE POINTS
>>A<< FRONT OIL SEAL INSTALLATION
AK305649
AB
Timing chain case
MB990699
Oil seal
Install the front oil seal into the timing chain case
using the special tool Differential oil seal installer
(MB990699).
>>B<< TIMING CHAIN CASE
INSTALLATION
1. Remove any liquid gasket remaining on the timing
chain case, the cylinder block, and the cylinder
head.
AK305517AB
MB991993
2. Install the special tool Oil seal guide (MB991993)
onto the crankshaft.
AK305642
AB
A
B
CAUTION
The timing chain case should be installed within
3 minutes of applying liquid gasket.
3. Apply a 2.0 ± 0.5 mm bead of liquid gasket to
location A, and a 1.5
± 0.5 mm bead of liquid
gasket to location B on the timing chain case
respectively as illustrated.
Specified sealant:
LOCTITE 5971 or exact equivalent
4. Install the timing chain case.
NOTE: The retaining bolts have different lengths.
Be sure to use the correct bolt for each location.
Main
Index
Group
TOC