Repair Manual

Cylinder block Crankshaft
bearing paint
color
Identification
mark
Journal
diameter
mm
1 50.000 − 50.005 Blue
2 50.005 − 50.010 Black
3 50.010 − 50.015 Red
AK305700
AC
A
B
CRANKSHAFT AND CYLINDER BLOCK
ENGINE OVERHAUL <4A9>
11B-47
3. Select and install the crankshaft bearing upper.
4. Measure the illustrated location. The error should
be within 0.5 mm.
In case of the service part, install it aligning the
bearing projection with the places shown in
Figure.
>>D<< CRANKSHAFT BEARING LOWER
INSTALLATION
AK306103
No.1
AF
No.4
No.3
No.2
Production date
No.5
1. The crankshaft bearing lower should be selected
based on the identification mark on the crankshaft
rear flange (illustrated) and the table shown
below.
AK305607
AB
Identification
color
2. Every crankshaft bearing lower is identified by the
paint mark at the illustrated location.
Crankshaft Crankshaft
bearing paint
color
Identification
mark
Journal
diameter
mm
P 46.024 − 46.029 Blue
Y 46.019 − 46.024 Yellow or Black
N 46.014 − 46.019 Red
W 46.009 − 46.014 White
B 46.004 − 46.009 Purple
AK305695
AC
A
B
3. Select and install the crankshaft bearing lower.
4. Measure the illustrated location. The error should
be within 0.5 mm.
In case of the service part, install it aligning the
bearing projection with the places shown in
Figure.
Main
Index
Group
TOC