Owner’s Manual

Steering wheel tilt lock lever
Features and controls 5-47
5
When parking on a hill, apply the parking
brake and turn the front wheels toward the
curb on a downhill grade, away from the curb
on an uphill grade.
N00511500198
To adjust the steering wheel height, release
the tilt lock lever while holding the steering
wheel by hand, and raise or lower the steering
wheel to the desired height.
After adjustment, securely lock the lever by
pulling it upward.
To release
1- Pull the lever up slightly.
2- Press and hold the button at the end of
the hand grip.
3- Push the lever downward.
CAUTION
 Before driving, be sure that the parking
brake is fully released and brake warning
light is off.
If you drive without the parking brake fully
released, the warning display will appear on
the information screen in the multi-informa-
tion display.
If a vehicle is driven without releasing the
parking brake, the brakes will be overheated,
resulting in ineffective braking and possible
brake failure.
Warning light
Warning display
Steering wheel tilt lock lever
1- Locked
2- Released
WARNING
 After adjusting, make sure the lock lever
is secured in the locked (1) position.
 Do not attempt to adjust the steering
wheel while driving. This can be danger-
ous.
 When releasing the tilt lock lever {moving
it to the position (2)}, be sure to hold the
steering wheel firmly. Otherwise, the
steering wheel may slip down too sud-
denly.
BK0210800US.book 47 ページ ２０１４年４月８日 火曜日 午前１１時２８分