Owner’s Manual

Multi-information display
Features and controls 5-95
5
N00555800162
When the ignition switch is turned to the
“ON” position, the display screen switches in
the following order.
When the ignition switch is turned to the
“ON” position, the system check screen is
displayed for about 4 seconds. If there is no
fault, information screen (when the ignition
switch is “ON”) is displayed.
If there is a fault, the screen changes to warn-
ing display. Refer to “Warning display list
(when the ignition switch is “ON”)” on page
5-114.
When the time for periodic inspection arrives,
“PERIODIC INSPECTION” is displayed for
a few seconds after the screen that is initially
displayed when the ignition switch is turned
“ON”. Refer to “Service reminder” on page
5-101.
1- Doors and trunk lid are closed
2- Doors or trunk lid is open
Information screen (With igni-
tion switch turned from “OFF”
to “ON”)
1- Screen when the ignition switch is
“OFF”
2- System check screen
3- Screen when the ignition switch is
“ON”
System check screen
NOTE
The system check screen display varies
depending on your equipment.
Service reminder
BK0210800US.book 95 ページ 2014年4月8日 火曜日 午前11時28分