Owner’s Manual

Replacement of light bulbs
Vehicle care and maintenance 9-31
9
4. While pressing the tab (D), pull out the
bulb (E).
5. To install the bulb, perform the removal
steps in reverse.
N00901900076
1. Turn the cap (A) counterclockwise to
remove it.
2. Turn the bulb (B) counterclockwise to
remove it.
3. While pressing the tab (C), pull out the
bulb (D).
*- Front of the vehicle
CAUTION
 Handle halogen light bulb with care. The gas
inside a halogen light bulb is highly pressur-
ized, so dropping, knocking, or scratching a
halogen light bulb can cause it to shatter.
 Never hold the halogen light bulb with a bare
hand, dirty glove, etc. The oil from your
hand could cause the bulb to break the next
time the headlights are used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
Headlights (high beam, except
for vehicles with high intensity
discharge headlights)
*- Front of the vehicle
*- Front of the vehicle
BK0210800US.book 31 ページ ２０１４年４月８日 火曜日 午前１１時２８分