Owner’s Manual

Replacement of light bulbs
9-32 Vehicle care and maintenance
9
4. To install the bulb, perform the removal
steps in reverse.
N00902000016
Do not attempt to disassemble or repair head-
lights, and do not attempt to replace their
bulbs.
N00943200121
The alignment of the headlights should be
checked by an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
N00900300129
1. Turn the cap (A) counterclockwise to
remove it.
2. Turn the socket (B) counterclockwise to
remove it.
CAUTION
 Handle halogen light bulb with care. The gas
inside a halogen light bulb is highly pressur-
ized, so dropping, knocking, or scratching a
halogen light bulb can cause it to shatter.
 Never hold the halogen light bulb with a bare
hand, dirty glove, etc.
The oil from your hand could cause the bulb
to break the next time the headlights are
used.
If the glass surface is dirty, clean it with
alcohol and let it dry completely before
installing the bulb.
Headlights (low/high beam, for
vehicles with high intensity dis-
charge lights)
WARNING
 A high voltage is present in the power cir-
cuit and in the bulbs and bulb terminals.
To avoid the risk of an electric shock, con-
tact an authorized Mitsubishi Motors
dealer or a repair facility of your choice
whenever repair or replacement is neces-
sary.
Adjustment of headlight aim
Daytime running lights (for
vehicles with high intensity dis-
charge headlights)
*- Front of the vehicle
BK0210800US.book 32 ページ ２０１４年４月８日 火曜日 午前１１時２８分