Owner’s Manual

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-25
5
2. While pushing the lock release buttons
(A), remove the cover of the ignition
switch.
3. Insert the emergency key into the ignition
switch.
4. Insert the F.A.S.T.-key into the emergency
key.
5. Press and hold the brake pedal down with
your right foot.
6. Press and hold the clutch pedal all the way
down (manual transaxle).
7. On vehicles with manual transaxle, place
the gearshift lever in the “N” (Neutral)
position.
On vehicles with SST, make sure the gear-
shift lever is in the “P” (PARK) position.
8. Turn the emergency key with the
F.A.S.T.-key to the “ON” position and
make certain that all warning lights and
warning displays are functioning properly
before starting the engine.
9. Turn the emergency key with the
F.A.S.T.-key to the “START” position
without pressing the accelerator pedal.
Release the emergency key with the
F.A.S.T.-key when the engine starts.
10. Remove the F.A.S.T.-key from the emer-
gency key.
NOTE
 For models equipped with a manual trans-
axle, the starter will not operate unless the
clutch pedal is fully depressed (Clutch inter-
lock). This is a safety feature.
NOTE
 On vehicles with Twin Clutch SST, the
starter will not operate unless the gearshift
lever is in the “P” (PARK) position or the
gearshift lever is in the “N” (NEUTRAL)
position with the brake pedal depressed.
For safety reasons, start the engine in the “P”
(PARK) position so that the wheels are
locked.
NOTE
 Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.
BK0210800US.book 25 ページ ２０１４年４月８日 火曜日 午前１１時２８分