Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -

Specifications

22B-1-2d

GEAR RATIO TABLE

A B C D E F G

1st 3.583 3.727 3.071 3.583 3.583 3.583 3.583

2nd 1.947 1.947 1.947 1.947 1.947 1.947 1.947

3rd 1.343 1.343 1.379 1.379 1.379 1.379 1.266

4th 0.976 0.976 1.030 1.030 1.030 1.030 0.970

5th 0.804 0.804 0.820 0.820 0.733 0.767 0.767

Reverse 3.416 3.416 3.363 3.363 3.363 3.363 3.363

1st 3.583

2nd 1.947

3rd 1.266

4th 0.970

5th 0.767

Reverse 3.363

Transfer 0.3018

SERVICE SPECIFICATIONS

Items Allowable range Limit

Input shaft front bearing end play mm -0.01- 0.12 -

Input shaft rear bearing end play <F5M41> mm -0.01- 0.09 -

Input shaft rear bearing end play <F5M42, W5M42> mm -0.01- 0.12 -

Input shaft 5th speed gear end play <F5M42, W5M42> mm -0.01- 0.09 -

Output shaft front bearing end play mm -0.01- 0.12 -

Output shaft rear bearing end play mm -0.01- 0.09 -

Output shaft 3rd speed gear end play mm -0.01- 0.09 -

Differential case end play <F5M41> mm 0.05- 0.17 -

Differential case pinion backlash <F5M41, F5M42> mm 0.025- 0.150 -

Front differential case backlash <W5M42> mm 0.025- 0.150 -

Differential case preload <F5M42> mm 0.05- 0.11 -

NOTE: Standard play = 0 mm

PWEE9508-G

Jun. 2000Mitsubishi Motors Corporation Revised