Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Transmission <F5M41>
22B-3-8
PWEE9508-A
E
Nov. 1995Mitsubishi Motors Corporation Added
(2) Install the transmission case and expand the snap ring.
(3) Tighten the transmission case mounting bolts to the
specified torque.
NOTE
Place the transmission upside down a nd let the snap ring
fit in the groove by taking advantage of the output shaft’s
own weight.
"
I
A
SEALING CAP INSTALLATION
Press-fit the sealing cap all the way up to the illustrated position.
"
J
A
REVERSE IDLER GEAR SHAFT BOLT
INSTALLATION
Using a screwdriver (8 mm in shaft diameter), center the bolt
hole.
"
K
A
CONTROL HOUSING INSTALLATION
Apply a 1.5 mm bead of sealant to the illustrated position
of the transmission case.
Specified sealant:
MITSUBISHI genuine sealant part No. MD997740 or
equivalent
Caution
Squeeze out the sealant uniformly, while making sure that
it is not broken or excessively applied.
Snap ring
Sealing cap
MB990938
MB990927