Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Transmission <F5M42, W5M42>
22B-4-4
DISASSEMBLY SERVICE POINTS
A
A
"
SEALING CAP REMOVAL
Drive a screwdriver into the sealing cap at the center, then
pry off the sealing cap with the screwdriver.
A
B
"
TRANSMISSION CASE REMOVAL
Expand the snap ring to remove it from the snap ring groove
of the ball bearing.
NOTE
Expansion of the snap ring causes the snap ring groove to
get out of position because of the output shaft’s own weight.
A
C
"
3RD-4TH SPEED SHIFT RAIL / 3RD-4TH SPEED
SHIFT FORK / 5TH-REVERSE SPEED SHIFT RAIL
/ 5TH-REVERSE SPEED SHIFT FORK REMOVAL
(1) Shift the 3rd-4th speed shift fork and 5th-reverse speed
shift fork in th e direction shown.
(2) Slide the 3rd-4th speed shift rail and 5th-reverse speed
shift rail in the direction shown a n d remove them together
with the shift fork.
A
D
"
INPUT SHAFT / OUTPUT SHAFT REMOVAL
Remove the input and output shafts together.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
Sealing cap
Snap ring
3rd-4th speed
shift fork
5th-reverse
speed shift
fork
5th-reverse
speed shift rail
3rd-4th speed
shift rail
Input shaft
Output shaft