Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Transmission <F5M42, W5M42>
22B-4-6
(3) While fitting each shift fork in the sleeve, slide the shift
rails in the direction shown and install.
"
C
A
SPRING PIN INSTALLATION
Install the spring pin such that its slit may face in the axial
direction of the shift rail.
"
D
A
SPACER INSTALLATION
Install the spacer selected in the section “ADJUSTMENT
BEFORE REASSEMBLY”.
"
E
A
OUTER RACE INSTALLATION
Use the special tools to install the outer race.
"
F
A
TRANSMISSION CASE INSTALLATION
(1) Apply a 1.5 mm bead of sealant to the illustrated position
of the transmission case.
Specified sealant:
MITSUBISHI genuine sealant part No. MD997740
or equivalent
Caution
Squeeze out the sealant uniformly, while making sure
that it is not broken or excessively applied.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
5th-reverse
speed shift rail
3rd-4th speed
shift rail
Shift rail
Spring pin
Slit
Shift fork
2.5 mm
MB990938
MB990935