Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Transmission <F5M42, W5M42>
22B-4-8
"
J
A
SPEEDOMETER GEAR INSTALLATION
Apply transmission oil to the O-ring of the speedometer gear.
Transmission oil:
Hypoid gear oil SAE 75W-85W conforming to API
classification GL-4 or higher
"
K
A
SELECT LEVER INSTALLATION
Apply grease to the control shaft sliding portion of the select
lever shoe.
Specified grease:
MITSUBISHI genuine grease part No. 0101011 or
equivalent
INSPECTION
BACK-UP LAMP SWITCH
(1) Check for continuity between terminals.
Switch condition Continuity
Pressed Not exist
Released Exists
(2) If the above requirements are not met, replace the back-up
lamp switch with a new one.
OIL TEMPERATURE SENSOR <For GDI engine only>
(1) Check for continuity between terminals.
Temperature (
°
C) Standard value (k
W
)
20 2.31 - 2.59
110 0.1451 - 0.1491
(2) If the standard value is not met, replace the oil temperature
sensor with a new one.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
O-ring
Control shaft
Select
lever shoe
Transmission oil