Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Input Shaft <F5M41>
22B-5-4
PWEE9508-A
E
Nov. 1995Mitsubishi Motors Corporation Added
"
E
A
3RD-4TH SPEED SYNCHRONIZER HUB
INSTALLATION
Install the 3rd-4th speed synchronizer hub in such a way that
it will be oriented in t he direction shown.
Caution
When the hubis installed, make sure that the synchronizer
ring is not caught.
"
F
A
SYNCHRONIZER SLEEVE INSTALLATION
(1) Install the synchronizer sleeve in such a way that it will
be oriented in the direction shown.
(2) When the synchronizer sleeve is installed, make sure that
the deep groove portion of the synchronizer hub is aligned
with t h e projecting portion of t h e sleeve.
"
G
A
4TH SPEED GEAR SLEEVE INSTALLATION
Identification mark
Rear of
trans-
mission
MD998812
MD998813
MD998826
MD998801
Identification
groove
Rear of
transmission
Synchronizer hub
Synchronizer
sleeve
MD998812
MD998813
MD998824
MD998801