Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Input Shaft <F5M42, W5M42>
22B-6-3
"
B
A
BALL BEARING INSTALLATION
Use the special tools to install the ball bearing.
"
C
A
SNAP RING INSTALLATION
Select a n d install a snap ring so that the input shaft front
bearing e n d play will have the standard value.
Standard value:
-0.01-0.12 mm
"
D
A
SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring securely up to the illustrated
position of t he synchronizer ring.
"
E
A
3RD-4TH SPEED SYNCHRONIZER HUB
INSTALLATION
Install the 3rd-4th speed synchronizer hub in such a way that
it will be oriented in t he direction shown.
Caution
When the hubis installed, make sure that the synchronizer
ring is not caught.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
MD998801
MD998812
MD998813
MD998816
Snap ring
Synchronizer spring
Identification mark
Rear of
trans-
mission
MD998801
MD998812
MD998813
MD998825