Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Input Shaft <F5M42, W5M42>
22B-6-5
"
J
A
THRUST PLATE STOPPER INSTALLATION
When the thrust plate is installed, make sure that it is not
tilted.
"
K
A
BALL BEARING INSTALLATION
Use the special tools to install the ball bearing.
"
L
A
SNAP RING INSTALLATION
Select an d install a snap ring so that the input shaft rear
bearing e n d play will have the standard value.
Standard value:
-0.01-0.12 mm
INSPECTION
INPUT SHAFT
(1) Check theoutside diameter of theneedle bearing mounting
portion for damage, abnormal wear an d seizure.
(2) Check the splines for damage a n d wear.
NEEDLE ROLLER BEARING
(1) Check to ensure that when the input shaft a n d gear are
combined and made to rotate, they rotate smoothly without
looseness and noise.
PWEE9508-E
E
Jun. 1998Mitsubishi Motors Corporation Revised
Thrust plate stopper
Thrust plate
MD998812
MD998818
MD998801
Snap ring