Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Output Shaft <F5M41>
22B-7-3
PWEE9508-A
E
Nov. 1995Mitsubishi Motors Corporation Added
"
B
A
SNAP RING INSTALLATION
Select and install a snap ring so that the output shaft front
bearing e n d play will have the standard value.
Standard value:
-0.01-0.12 mm
"
C
A
1ST SPEED GEAR SLEEVE INSTALLATION
"
D
A
SYNCHRONIZER SPRING INSTALLATION
Install the synchronizer spring securely up to the illustrated
position of t he synchronizer ring.
"
E
A
1ST-2ND SPEED SYNCHRONIZER HUB
INSTALLATION
Install the 1st-2nd speed synchronizer h ub in such a way
that it will be oriented in the direction shown.
Caution
When the hubis installed, make sure that the synchronizer
ring is not caught.
Snap ring
MD998812
MD998814
MD998822
Sleeve
Synchronizer spring
Rear of trans-
mission
Identification mark
MD998812
MD998814
MD998822