Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Output Shaft <F5M41>
22B-7-4
PWEE9508-A
E
Nov. 1995Mitsubishi Motors Corporation Added
"
F
A
SYNCHRONIZER SLEEVE INSTALLATION
(1) Install the synchronizer sleeve in such a way that it will
be oriented in the direction shown.
(2) When the synchronizer sleeve is installed, make sure that
the deep groove portion of the synchronizer hub is aligned
with t h e projecting portion of t h e sleeve.
"
G
A
2ND SPEED GEAR SLEEVE INSTALLATION
"
H
A
SNAP RING INSTALLATION
Select and install a snap ring so that the output shaft 3rd
speed gear end play will have the standard value.
Standard value:
-0.01-0.09 mm
"
I
A
BALL BEARING INSTALLATION
Rear of
transmission
Synchronizer sleeve
Synchronizer hub
MD998812
MD998813
MD998820
Snap ring
MD998812
MD998817