Motors Automobile Parts User Manual

MANUAL TRANSMISSION (E-W) -
Control Housing
22B-12-2
PWEE9508-A
E
Nov. 1995Mitsubishi Motors Corporation Added
DISASSEMBLY SERVICE POINT
A
A
"
LOCK PIN REMOVAL
Drive the lock pin out of position from the direction shown.
REASSEMBLY SERVICE POINTS
"
A
A
NEEDLE BEARING INSTALLATION
Press fit the needle bearing up the illustrated dimension, while
making sure that the model number stamped side is oriented
in the direction shown.
"
B
A
OIL SEAL INSTALLATION
Apply transmission oil to the oil seal lip area.
Transmission oil:
Hypoid gear oil SAE 75W-85W conforming to API
classification GL-4 or higher
"
C
A
AIR BREATHER INSTALLATION
(1) Apply a sealantto the outside circumference of theinserting
portion.
Specified sealant:
3M SUPER WEATHERSTRIP No.8001 or equivalent
(2) Make sure that the projecting portion is oriented in the
direction shown.
PWEE9508-C
E
Jan. 1997Mitsubishi Motors Corporation Revised
Lock pin
Control finger
Control housing
2mm
Model
number
stamped
side
Needle
bearing
TFM0859