Specifications

Method 2: Installation using DIN rail

1. Have a metal control box ready. (Minimum steel thickness: 1 mm (3/64 in))

2. Attach the supplied DIN rail attachment to the AHC ADAPTER with the supplied M3 screws. (Fig. 7-4)

3. Properly mount the AHC ADAPTER on the DIN rail vertically. (Fig. 7-5 and Fig. 7-6)

M3 (6 mm (1/4 in))

DIN rail attachment

Fig. 7-4 Fig. 7-5

Note

● The DIN rail attachment must be fixed to the AHC ADAPTER with four M3 screws.

● The surface on which the AHC ADAPTER will be installed needs to be strong enough to support its weight.

● Do not install the AHC ADAPTER where it may receive vibration. Use studs to fix the AHC ADAPTER as necessary.

● Leave the AL2-CAB BOARD (Fig. 5-1) wrapped in bubble wrap until after AHC ADAPTER has been installed in the metal

control box.