user manual

5.1 Connecting to the 10BASE-T (AJ71E71N-B5T, A1SJ71E71N-B5T)

For AJ71E71N-B5T

1) Connect the twisted pair cable and the

hub.

2) Connect the twisted pair cable to the

E71.

5.2 Connecting to the 10BASE5 (AJ71E71N-B5T, A1SJ71E71N-B5T)

Supply power

for transceiver

AUI Cable

Retainer

For AJ71E71N-B5T

<Connection procedure> (

1) Slide the retainer toward the direction A

as shown in the figure.

2) Push in the AUI cable connector all the

way.

3) Slide the retainer toward the direction B

as shown in the figure.

4) Confirm that the AUI cable is locked.

5) Supply power to the transceiver ( 2).

(Refer to 3 in Chapter 2)

1 Connect the AUI cable while the power to the module mounting station is turned off.

2 Use a transceiver with a function that is generally called SQETEST or heart beat (a

transceiver function that emits signals to notify whether the transceiver is operating

normally at the end of communication).

5.3 Connecting to the 10BASE2 (AJ71E71N-B2, A1SJ71E71N-B2)

[2]

[1]

For AJ71E71N-B2

<Connection procedure> ( 2)

1) Push in the connector by aligning the

groove [1] and tab [2] as shown in the

figure.

2) While pushing in the connector, rotate it

clockwise by a 1/4 turn.

3) Turn until the connector locks.

4) Confirm that the connector is locked.