Manualshelf

Service manual

ManualsBrandsMitsubishi ManualsAir ConditionerMr.Slim MS-A09WA
27282930313233343536
33
(8) To change the airfl ow direction not to blow directly onto your body.
To change
the airfl ow direction
When to use this function? COOL/DRY
Pressing and holding VANE
CONTROL button for 2 sec-
onds or more, the horizontal
vane reverses and moves
horizontal position.
Use this function if you don’t
want the air from the indoor unit
to blow directly onto your body.
• Depending on the shape of
the room, the air may blow
directly onto your body.
• Press VANE CONTROL but-
ton again to return the vane
to the previously-set position.
The air conditioner starts the
cooling or drying operation ap-
prox. 3 minutes after the vane
has moved to the horizontal
position.
• When VANE CONTROL but-
ton is pressed again, the vane
returns to the previously-set
position and the air conditioner
starts the cool or dry operation
in approx. 3 minutes.
NOTE : • If you make the airfl ow not to blow directly onto your body by pressing VANE CONTROL button,
the compressor stops for 3 minutes even during the operation of the air conditioner.
• The air conditioner operates with Very Low speed until the compressor turns on again.
Horizontal
position
(9) ECONO COOL ( ) operation (ECONOmical operation)
When ECONO COOL button is pressed in COOL mode, set temperature is automatically set 3.6°F higher than that in
COOL mode.
Also the horizontal vane swings in various cycle.
SWING operation makes you feel cooler than set temperature. So, even though the set temperature is higher than that
in COOL mode, the air conditioner can keep comfort. As a result, energy can be saved.
ECONO COOL operation is cancelled when ECONO COOL button is pressed once again. Plessing VANE CONTROL
button or POWERFUL button, or changing to other operation mode also cancels ECONO COOL operation.
(
10
) POWERFUL ( ) operation
The air conditioner automatically adjusts the fan speed and the set temperature, and operates the POWERFUL mode.
The POWERFUL mode is automatically released 15 minutes after operation starts, and the operation mode returns to
the mode prior to POWERFUL operation.