[ Updated 12/09 ] www.mitsubishicomfort.
“Comfort” is a concept many of us notice most when we’re uncomfortable. And comfort is our #1 priority at Mitsubishi Cooling and Heating Solutions. Our innovative split zoned cooling and heating systems are designed to improve the quality of life for you and your family with personalized comfort control. Their cutting edge, environmentally sensitive technologies 02 also make them some of the most efficient HVAC systems in the world. Perhaps your home has a room that’s always too hot or too cold.
Mitsubishi Electric Cooling and Heating Solutions Split zoning technology is a primary source of year-round comfort control world wide. Mitsubishi has been available in the U.S. for almost 30 years, but is increasing in popularity because it provides comfort and is efficient. Mitsubishi Electric’s split zoning systems use refrigerant lines to connect an outdoor unit to one or multiple indoor air handlers, increasing the energy efficiency within a home or building.
Mitsubishi System Technologies: a user-friendly zoned residential and light commercial personalized comfort solution (M-Series wall-mounted and ducted systems) Comfort is a home that’s cool and dry in the summer and cozy and warm in the winter. This environment is what you get with the Mitsubishi Electric system: perfect year-round comfort.
Comfort Control Energy efficient Zoning Easy Installation Heat, and Lots of It With the advanced technology added to the already innovative INVERTER compressor the MSZ-FE high-efficiency systems are not only ENERGY STAR® rated and Tax Credit qualified, providing up 26 SEER, they can provide exceptional heating performance. These systems provide heating to -13˚ F and produce up to 100% heating capacity at 5˚ F (MSZ-FE09; 92% capacity at 5˚ F for MSZ-FE12).
Superior Operation Advanced Control Technology Through Mitsubishi’s advanced controls technology the indoor unit is powered by the outdoor unit. Three polarity sensitive wires plus a ground conductor run from the outdoor to the indoor unit, providing both power and communication. An advanced wireless remote control is standard on all ductless models.
Total Comfort Programmable Comfort Smart Set featured on MSZ-GE systems provides the option to program multiple settings into one ‘quick’ press feature providing an additional level of comfort control. Additional Air Circulation With the WIDE VANE or SWING mode, available on the MSY(Z)-GA24/ D30/36NA, there is an option for seven horizontal airflow directions that provide 150˚ of airflow for greater conditioned air circulation.
Product Line-Up Showcase system models and controllers S I NGLE - ROOM , WALL - MOU N T ED A / C MS/MU Air Conditioners 9,500 to 12,000 Btu/h 13 SEER (cooling only) MSY/MUY Air Conditioners 9,000 to 34,600 Btu/h 15.
M ULTI-R OOM HEA T PUM P w i t h WALL- MOU N T ED a n d DU C T ED I NDOOR U NITS (cooling and heating) • Connect multiple indoor units (wall-mounted and/or ducted) • INVERTER-driven compressor • Provides cooling and heating in a wide range of capacities • Ideal for applications such as: - Bedrooms, home offices, living rooms, dining rooms, bonus rooms, basements, kitchens and more For more information on multi-room systems refer to pages 14-23.
(MS-A12WA Model Shown) ms/ms y COOLING-ONL Y Non-inverter Indoor Unit Outdoor Unit Model Name Cooling *1 Power Supply Voltage MS-A12WA MU-A12WA 12,000 Rated Capacity Btu/h 9,500 Capacity Range Btu/h - - Total Input W 870 1,070 Energy Efficiency Moisture Removal Sensible Heat Factor Phase, Cycle, Voltage Indoor - Outdoor L1-N-2 Indoor - Outdoor L1-N-2 Indoor - Remote Controller MCA Fan Motor SEER Pints/h Airflow (Lo-Med-Hi) Indoor Unit MS-A09WA MU-A09WA Sound Pressure Level (Lo-Med-Hi)
INVERTER (MSY-GE17NA Model Shown) msy COOLING-ONL Y (cont .) Tax Cr edit Indoor Unit Outdoor Unit Model Name Cooling *1 Power Supply Voltage 9,000 12,000 14,000 17,200 22,000 30,700 34,600 3,800-12,200 3,800-13,600 9,800-30,700 9,800-34,600 W 3,700-18,700 1,640 (2402,070) 4,400-22,000 Total Input 3,100-18,200 1,080 (1602,000) Energy Efficiency SEER 19.
INVERTER (MSZ-FE12NA Model Shown) MSZ he at pu mp Tax Cr edit Indoor Unit Outdoor Unit Model Name Cooling *1 Heating at 47° F *2 Heating at 17° F *3 Power Supply Voltage Indoor Unit MSZ-GE09NA MUZ-GE09NA 9,000 9,000 12,000 12,000 3,800-12,200 2,800-9,000 3,800-13,600 2,800-12,000 Total Input W 660 (205-1,200) 580 (160-650) 960 (205-1,300) 930 (160-960) Energy Efficiency SEER 21 26 20.
INVERTER (MSY(Z)-D30NA Model Shown) MSZ he at pump (cont.) Tax Cr edit Model Name Cooling *1 Heating at 47º F *2 Heating at 17º F *3 Power Supply Voltage Indoor Unit MSZ-GE15NA MSZ-GE18NA MSZ-GA24NA Outdoor Unit MUZ-GE15NA MUZ-GE18NA MUZ-GA24NA Rated Capacity Btu/h 14,000 17,200 22,000 Capacity Range Total Input Energy Efficiency Moisture Removal Sensible Heat Factor Rated Capacity Btu/h W SEER Pints/h 3,100-18,200 1,080 (160-2,000) 21 2.7 0.
multiple rooms with individual control from a single system With a multi-room system, you can enjoy your ideal level of comfort in the most important rooms in your home. Each room (zone) operates independently. People in difference rooms – the kitchen, master bedroom or living room – can enjoy temperature settings that make each of them most comfortable. If you’re looking for a complete comfort solution for several different rooms, the MXZ multi-room system is the right choice.
MSZ Wall-Mounted Indoor Units for MXZ Heat Pump Systems Providing a wide range of cooling and heating capacities, each wall-mounted indoor unit mounts high on a wall and connects to the outdoor unit by a refrigerant line run via a 3” hole. The MSZ units provide highly efficient solutions to cooling and heating needs, and provide personalized comfort for the individual zones in which they are installed.
INVERTER Mu lti-room MXZ INV E RTER heat pump Model Name Outdoor Unit Cooling *1 Non-ducted/Ducted Rated Capacity Capacity Range Total Input Rated Capacity Heating at 47º F *2 Capacity Range Non-ducted/Ducted Outdoor Unit Total Input Rated Capacity Heating at 17º F *3 Total Input Non-ducted/Ducted Maximum Capacity Maximum Total Input Phase,Cycle,Voltage Indoor - Outdoor S1-S2 Indoor - Outdoor S2-S3 MCA MOCP Fan Motor Power Supply Voltage Compressor Airflow (Cooling/Heating) *1/*2 Refrigerant Contro
MSZ WALL-MO U NTED INDOOR UNITS (FOR MXZ-2A20/3 A 3 0 / 4 A 3 6 N A OUTD O O R U N I T S ) Indoor Unit Outdoor Unit Model Name Cooling *1 Heating at 47º F *2 Power Supply Rated Capacity Total Input Rated Capacity Total Input MSZ-A09NA MSZ-FD09NA 9,000 16 10,900 16 9,000 18 10,900 24 Btu/h W Btu/h W MSZ-A12NA MSZ-FD12NA MSZ-A15NA For Use with all MXZ-Series 12,000 21 13,600 21 Phase, Cycle, Voltage A F.L.A.
Multiple Rooms With An Added Bonus Visit www.mitsubishicomfort.com/taxcredit for more details on the qualified systems or ask your contractor. The MXZ-2B20NA system, when combined with two MSZ-GE09NA indoor units, is ENERGY STAR rated and qualifies for the government’s Economic Stimulus Tax Credit of up to $1,500. Visit www.dsireusa.org for any possible local rebate opportunities from state or utility companies. This is only the start.
MSZ WALL-MO U NTED INDOOR UNITS (FOR MXZ-2B20N A O U TDO O R UN I T ) Model Name Cooling *1 Heating at 47° F *2 Power Supply Indoor Unit Rated Capacity Btu/h Total Input W Rated Capacity Btu/h Total Input W MSZ-GE09NA MSZ-FE09NA MSZ-GE12NA MSZ-FE12NA MSZ-GE15NA MSZ-GE18NA 9,000 9,000 12,000 12,000 14,000 17,200 22 18 22 24 45 43 10,900 10,900 14,400 13,600 18,000 21,600 23 24 23 30 31 37 Phase, Cycle, Voltage 1-phase, 60Hz, 208 / 230V *3 Indoor - Outdoor S1 - S2 AC
Middle Middle 10 10 [0.04] [0.04] Low Low Rated Ratedpoint point Low Low Rated Ratedpoint point External static pressure [in.WG](Pa) External static pressure [in.WG](Pa) External static pressure [in.WG](Pa) External static pressure [in.WG](Pa) 6 7 8 [212] [247] [282] Airflow rate(m3/min)[CFM] 9 [318] Rated Rated point point Low Low 10 10 LowLow [0.04] [0.
M X Z- 3A 3 0 NA ( 3 : 1 , 2 : 1 ) O u t d o o r Un i t MXZ System Com bina tion optio ns MXZ-2A20NA Combinations* MSZ-A12NA Indoor Unit (using MSZ-A and/or MSZ-FD wall-mounted indoor units and/or SEZ ducted indoor units) Indoor Unit (Unit A + Unit B) Combinations 9+9 9 + 12 9 + 15 12 + 12 Cooling Capacity (Btu/h) Heating Capacity (Btu/h) Unit A Unit B Total 9,000 10,900 9,000 10,900 8,500 11,500 9,500 12,500 7,500 12,500 8,250 13,750 10,000 10,000 11,000 11,000 18,000 21,800 Power Usag
MXZ-4A36NA Combinations* (using MSZ-A and/or MSZ-FD wall-mounted indoor units and/or SEZ ducted indoor units) Indoor Unit (Unit A + Unit B + Unit C + Unit D) Combinations ** Cooling Capacity (Btu/h) Unit A Unit B Heating Capacity (Btu/h) Unit C Unit D – 27,000 (All Wall-mounted MSZ) 25,800 (All Ducted SEZ) 26,600 - 26,200 (Combination) 2,860 - 2,950 Wall: 10,800 Wall: 10,800 Wall: 10,800 Ducted: 10,400 Ducted: 10,400 Ducted: 10,400 – 32,400 (All Wall-mounted MSZ) 31,200 (All Ducted SEZ) 32,000 - 3
MXZ-4A36NA Combinations* (continued) (using MSZ-A and/or MSZ-FD wall-mounted indoor units and/or SEZ ducted indoor units) Indoor Unit (Unit A + Unit B + Unit C + Unit D) Combinations ** Cooling Capacity (Btu/h) Unit A Unit B Heating Capacity (Btu/h) Unit C Unit D - 32,100 (All Wall-mounted MSZ) 31,700 (All Ducted SEZ) 32,100 - 31,700 (Combination) 3,500 - 3,570 13,400 - 32,400 (All Wall-mounted MSZ) 32,000 (All Ducted SEZ) 32,400 - 32,000 (Combination) 2,700 12,700 12,700 - 12,700 12,700 -
Mitsubishi System Technologies: commercial, institutional and large residential personalized comfort solution. (P-Series systems) Mitsubishi Electric delivers flexible and convenient cooling and heating solutions to almost any commercial, institutional or large residential application. Choose from small, quiet indoor and outdoor units that operate with the increased efficiency you need.
Easy-clean Filters Innovative Compressor Technology Located in the outdoor unit, INVERTER-driven compressor systems detect subtle changes in temperature and, like a car’s cruise control, automatically adjust compressor speed unlike conventional units, which start and stop repetitively.
Mitsubishi System Technologies: indoor unit specific technologies PLA ceiling-recessed model Wider Air Stream Independent Vane Motor Control Longer air outlets deliver wider air streams for improved air distribution and energy savings. This feature means quieter air delivery with fewer drafts and great overall cooling and heating coverage. Each of the four vanes can be set by the wired remote controller to operate independently to match the room layout.
PKA wall-mounted model Ultimate Comfort Meets Ultimate Convenience Lightweight, Easy-to-install Indoor Unit Select from a wall-mounted, hard-wired controller (PKA-HA/KA) for ultimate comfort control. The set-temperature display is large and easy to read. Using the 24-hour timer, you can get the unit operation to start and stop at specified times and to repeat daily. And the convenient remote provides easy control of the Fan Speed as well as the cool, heat, AUTO and Dry modes from anywhere in the room.
Product Line-Up Showcase system models and controllers Indoor Unit Models Mitsubishi Electric indoor units are available in a wide variety of styles and capacity ranges to provide an almost unlimited number of applications. If there is a problem, we have a solution.
Oudoor Unit Models Mitsubishi Electric outdoor units, either cooling-only or heat pump models, work with each of the indoor unit styles creating a wide range of installation applications. These outdoor units employ advanced Pulse Amplitude Modulation (PAM). PAM adjusts the form of the current wave to emulate the form of the supply voltage wave so that 98 percent of input power is effectively utilized.
P-Series Hyper-Heating INVERTER Bringing year-round comfort solutions to extreme climates. Heat Pump System: 34,200 to 36,000 Btu/h Capacity Unequaled Year-round Comfort The Next Generation in Heat Pump Technology The cooling and heating success of Mitsubishi Electric’s INVERTER heat pump systems is well documented.
Warm Air Quickly! At startup, a special circuit in H2i P-Series quickly delivers refrigerant to the air-conditioning cycle, which rapidly increases the mass flow rate in the system. As a result, air at comfortable temperatures begins flowing from indoor units right away. Even at an outdoor temperature of -13˚ F, the H2i P-Series system can discharge 100˚ F temperature air from the indoor units.
(PKA-A30KA Model Shown) INVERTER PKA COOLING-ONL Y HA/KA = Wired controller HAL/KAL = Wireless controller BS = Seacoast Protection Indoor Unit Outdoor Unit Model Name Rated Capacity Cooling *1 Power Supply Voltage Capacity Range Btu/h 6,000-12,000 8,000-18,000 12,000-24,000 12,000-30,000 12,000-34,200 Total Input W 1,190 2,240 2,270 4,130 5,030 Energy Efficiency SEER 15.2 15.3 17.0 15.5 14.
INVERTER (PKA-A30KA Model Shown) PKA H EAT PU MP HA/KA = Wired controller HAL/KAL = Wireless controller BS = Seacoast Protection Indoor Unit Outdoor Unit Model Name Cooling *1 Heating at 47° F *2 Heating at 17° F *3 Power Supply Voltage Rated Capacity Btu/h Capacity Range Btu/h 8,000-18,000 12,000-24,000 12,000-30,000 12,000-34,200 Total Input W 2,240 2,270 4,130 5,030 Energy Efficiency SEER 15.3 17.0 15.5 14.
INVERTER PLA COOLING-ONL Y (PLA-A36BA Model Shown with optional I-SEE™ sensor) BS = Seacoast Protection Model Name Cooling *1 Power Supply Voltage Indoor Unit PLA-A12BA PLA-A18BA Outdoor Unit PUY-A12NHA3 (-BS) PUY-A18NHA3 (-BS) Btu/h 12,000 18,000 24,000 30,000 35,000 42,000 6,000-12,000 8,000-18,000 12,000-24,000 12,000-30,000 12,000-35,000 18,000-42,000 2,500 4,100 4,500 4,600 Total Input W 1,260 1,940 Energy Efficiency SEER 13.5 14.2 13.6 14.2 14.
INVERTER PLA he at pump (PLA-A36BA Model Shown with optional I-SEE™ sensor) BS = Seacoast Protection Indoor Unit Outdoor Unit Rated Capacity Btu/h PLA-A18BA PUZ-A18NHA3 (-BS) 18,000 Capacity Range Btu/h 8,000-18,000 12,000-24,000 12,000-30,000 12,000-35,000 18,000-42,000 Total Input W 1,940 2,500 4,100 4,500 4,600 Energy Efficiency SEER 14.2 14.2 14.
INVERTER (PCA-A36KA Model Shown) PCA COOLING-ONL Y BS = Seacoast Protection Indoor Unit Outdoor Unit Model Name Cooling *1 Power Supply Voltage Rated Capacity Btu/h Capacity Range Btu/h 12,000-24,000 12,000-30,000 12,000-35,000 18,000-42,000 Total Input W 2,340 3,760 4,630 4,110 Energy Efficiency SEER 16.8 14.5 14.
INVERTER (PCA-A36KA Model Shown) PCA he at pump BS = Seacoast Protection Indoor Unit Outdoor Unit Model Name Cooling *1 Heating at 47° F *2 Heating at 17° F *3 Power Supply Voltage Rated Capacity Btu/h Capacity Range Btu/h 12,000-24,000 12,000-30,000 12,000-35,000 18,000-42,000 Total Input W 2,340 3,760 4,630 4,110 Energy Efficiency SEER 16.8 14.5 14.
INVERTER (PEA-A18AA Model Shown) PEA/PEA D COOLING-ONL Y BS = Seacoast Protection Model Name Cooling *1 Power Supply Voltage Indoor Unit Outdoor Unit Remote Controller Indoor Unit Outdoor Unit Rated Capacity Btu/h Capacity Range Btu/h Total Input W Energy Efficiency SEER Moisture Removal Pints/h Sensible Heat Factor Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 Indoor - Remote Controller MCA A Fan Motor F.L.A.
INVERTER (PEA-A18AA Model Shown) BS = Seacoast Protection Model Name Cooling *1 Heating at 47° F *2 Heating at 17° F *3 Power Supply Voltage PEA/PEA D Heat pump Indoor Unit Outdoor Unit Rated Capacity Capacity Range Total Input Btu/h Btu/h W Energy Efficiency Moisture Removal Sensible Heat Factor Rated Capacity Capacity Range Total Input HSPF (IV) Capacity Total Input Phase, Cycle, Voltage Indoor - Outdoor S1 - S2 Indoor - Outdoor S2 - S3 Indoor - Remote Controller MCA Fan Motor Fan Motor Output S
External static pressu External static pressu External static pressu External static pressu [0.12] [0.12] Limit Limit 2020 [0.08] [0.08] High High 1010 [0.04] [0.04] 1010 [0.04] [0.
High Middle 20 [0.080] Low 100 [0.401] 50 [0.201] [0.201] Rated point 40 [0.161] External static pressure (Pa)[in.W Rated point 30 [0.120] External static pressure (Pa)[in.W 40 [0.161] External static pressure (Pa)[in.W Middle Rated point 30 [0.120] High Low 20 [0.080] Middle Low Rated point 100 [0.401] Middle 50 [0.201] Low 10 [0.040] 10 [0.040] 25 [883] 30 [1059] 35 [1236] Airflow rate (m3/min)[cfm] 40 [1412] 0 [0] 10 [353] 45 [1589] High External pressure (Pa)[in.
H2i P-Series Heat p ump ® W a l l - mounted models Ceiling-cassette models Indoor Unit Outdoor Unit Rated Capacity Btu/h PKA-A30KA(L) PKA-A36KA(L) PUZ-HA30NHA2 PUZ-HA36NHA2 30,000 33,500 Capacity Range Btu/h 18,000-30,000 18,000-34,200 18,000-30,000 18,000-36,000 18,000-30,000 18,000-36,000 Total Input W 2,500 2,790 2,450 2,690 2,480 2,810 Energy Efficiency SEER 16.5 16.2 15.6 17 16.1 16.
H2i P-S erie s Heat pump ® Horizontal ducted models Indoor Unit Outdoor Unit Rated Capacity Btu/h PEAD-A30AA PEAD-A36AA PUZ-HA30NHA2 PUZ-HA36NHA2 30,000 34,000 Capacity Range Btu/h 18,000-30,000 18,000-36,000 Total Input W 2,500 2,800 Energy Efficiency SEER 16.5 16.
M-Series RATING CONDITIONS REFRIGERANT LINE LENGTH FLARE/FLARE INDOOR INTAKE AIR TEMPERATURE 95° F D.B., 71° F W.B (MU, MXZ-A/-B) MAXIMUM 90° F D.B., 73° F W.B. (MUZ/Y-A/-GA/-GE/-D/-FE) COOLING 67° F D.B., 57° F W.B. MINIMUM (All M-Series Units) MAXIMUM HEATING MINIMUM OUTDOOR INTAKE AIR TEMPERATURE 115° F D.B. (All M-Series Units) 14° F D.B. (MUZ/Y-A/-GA/-GE/-D/-FE; MXZ-A/-B) 67° F D.B. (MU*) 80° F D.B., 67° F W.B. (All MSeries Inverter Heat Pump Units) 75° F D.B., 67° F W.B.
OPTIONAL ACCESSORIES PART NUMBER USE WITH DESCRIPTION Controls Options MAC-397IF-E M-Series INVERTER Units MA and contact terminal interface MAC-399IF-E M-Series INVERTER Units M-NET control adapter for Mr.
Line - Hide Lineset Cover System Put a professional finish on air conditioning installations with an easy-to-install modular system that beautifies exteriors and protects linesets, drainlines, and wiring. • Available in four sizes: 2-1/4”, 3”, 4”, and 6” tubes. • Snap-on covers and a full selection of couplings, elbows, T-joints, caps, and more for any application, complex or simple. • High-quality PVC with UV inhibitors for outdoor service in all weather conditions.
BV-Series Ball Valves Model numbers: BV14FFSI BV38FFSI BV12FFSI BV58FFSI • • • • • • • • • • • C US LISTED 891N REFRIGERANT VALVE Size available: 1/4”; 3/8”; 1/2”; 5/8” Fully factory assembled Furnace brazed and pressure tested Each ball valve is equipped with Schrader Valve for refrigerant service Design working pressure: 700 PSIG Temperature range: -40˚ F to +325˚ F (-40˚ C to +149˚ C) Forged brass body and seal cap Teflon® seals and gaskets (no synthetic O-rings) Seal cap design permits valve opera
Mitsubishi Electric Shizuoka Works acquired ISO 9001 certification under Series 9000 of the International Standard Organization (ISO), based on a review of quality warranties for the production of air-conditioning equipment. The plant also acquired environmental management system standard ISO 14001 certification.
