SPLIT-TYPE AIR CONDITIONERS INDOOR UNIT MSZ-GE06NA MSZ-GE09NA MSZ-GE15NA MSZ-GE18NA 01_JG79Y262H01_cover.indd 1 MSZ-GE12NA For user OPERATING INSTRUCTIONS • To use this unit correctly and safely, be sure to read these operating instructions before use. English Para los clientes MANUAL DE INSTRUCCIONES • Para utilizar esta unidad de forma correcta y segura, lea previamente estas instrucciones de funcionamiento.
● OPERATING INSTRUCTIONS ● CONTENTS ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SAFETY PRECAUTIONS NAME OF EACH PART PREPARATION BEFORE OPERATION SELECTING OPERATION MODES FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT SMART SET OPERATION ECONO COOL OPERATION TIMER OPERATION (ON/OFF TIMER) CLEANING WHEN YOU THINK THAT TROUBLE HAS OCCURRED WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME INSTALLATION PLACE AND ELECTRICAL WORK SPECIFICATIONS 1 3 4 5 6 6 7 7 8 9 10 10 10 SAFETY PRECAUTIONS • Since rotating parts
SAFETY PRECAUTIONS CAUTION Do not touch the air inlet or the aluminum fins of the indoor/ outdoor unit. • This may cause injury. Do not use insecticides or flammable sprays on the unit. • This may cause a fire or deformation of the unit. Do not operate switches with wet hands. • This may cause electric shock. Do not clean the air conditioner with water or place an object that contains water, such as a flower vase, on it. • This may cause fire or electric shock.
● OPERATING INSTRUCTIONS ● NAME OF EACH PART Indoor unit Remote controller Signal transmitting section Distance of signal : About 20 ft. (6 m) Front panel Air filter (Nano platinum filter) Air cleaning filter (Anti-Allergy Enzyme Filter) Operation display section Beep(s) is (are) heard from the indoor unit when the signal is received.
PREPARATION BEFORE OPERATION Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on. Installing the remote controller batteries 4. 1. Press RESET. Remove the front lid. 2. 3. Insert the negative pole of AAA alkaline batteries first. Install the front lid. • Make sure the polarity of the batteries is correct. • Do not use manganese batteries and leaking batteries. The remote controller could malfunction. • Do not use rechargeable batteries.
● OPERATING INSTRUCTIONS ● SELECTING OPERATION MODES AUTO mode (Auto change over) The unit selects the operation mode according to the difference between the room temperature and the set temperature. During AUTO mode, the unit changes mode (COOL↔HEAT) when the room temperature is 4°F (2°C) away from the set temperature for more than 15 minutes. Note: Auto Mode is not recommended if this indoor unit is connected to a MXZ type outdoor unit.
FAN SPEED AND AIRFLOW DIRECTION ADJUSTMENT Press to select fan speed. Each press changes fan speed in the following order: (AUTO) (Quiet) (Low) (Med.) (High) (Super High) • Two short beeps are heard from the indoor unit when set to AUTO. • Use higher fan speed to cool/heat the room quicker. It is recommended to lower the fan speed once the room is cool/warm. • Use lower fan speed for quiet operation.
● OPERATING INSTRUCTIONS ● ECONO COOL OPERATION Press during COOL mode page 5 to start ECONO COOL operation. The unit performs swing operation vertically in various cycles according to the temperature of airflow. Set temperature is set 4°F (2°C) higher automatically. Press again to cancel ECONO COOL operation. • ECONO COOL operation is also cancelled when the VANE button is pressed. What is “ECONO COOL”? Swing airflow (change of airflow) makes you feel cooler than stationary airflow.
CLEANING Instructions: • Switch off the power supply or turn off the breaker before cleaning. • Be careful not to touch the metal parts with your hands. • Do not use benzine, thinner, polishing powder, or insecticide. Air filter (Nano platinum filter) • Clean every 2 weeks • Remove dirt by a vacuum cleaner, or rinse with water. • After washing with water, dry it well in shade. What is “Nano platinum filter”? Nano platinum is a ceramic particle that includes a platinum nanoparticle.
● OPERATING INSTRUCTIONS ● WHEN YOU THINK THAT TROUBLE HAS OCCURRED Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer. Symptom Explanation & Check points Indoor Unit The unit cannot be operated. • Is the breaker turned on? • Is the power supply plug connected? • Is the ON timer set? Page 7 All LED lamps on the indoor unit • Are the horizontal vanes installed correctly? are blinking. The horizontal vane does not move.
HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN JG79Y262H01 01_JG79Y262H01_cover.
