M-Series SEZ-KA Engineering Manual
Table Of Contents
- Contents
- 1. INDOOR UNITS
- 2. OUTDOOR UNITS
- 3. SYSTEM
- 3-1. SPECIFICATIONS
- 3-2. EXTERNAL DIMENSIONS
- 3-3. CENTER OF GRAVITY
- 3-4. ELECTRICAL WIRING DIAGRAMS
- 3-5. REFRIGERANT SYSTEM DIAGRAMS
- 3-6. CAPACITY CORRECTION CURVE BY TEMPERATURE
- 3-7. CAPACITY CORRECTION TABLE BY TEMPERATURE
- 3-8. Capacity correction curve by refrigerant piping length
- 3-9. CAPACITY CORRECTION TABLE BY REFRIGERANT PIPING LENGTH
- 3-10. CHARGE CALCULATIONS
- 3-11. AIR FLOW DATA
- 3-12. SOUND PRESSURE LEVELS
- 3-13. STANDARD OPERATION RANGE
- 3-14. ACCESSORIES
SEZ Ducted Heat Pump Systems (August 2014)
SEZ-23
© 2014 Mitsubishi Electric US, Inc.
Due to continuing improvement, above specication may be subject to change without notice.
3-6. CAPACITY CORRECTION CURVE BY TEMPERATURE
Note :
This value of frequency is not the same as the actual frequency in operating.
(2) Heating Performance Curve
SEZ-KD09NA4.TH SEZ-KD12NA4.TH SEZ-KD15NA4.TH
65
70
75
75
70
65
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.5
0.4
Indoor intake air DB temperature (°F)
155 25 35 45 55 65 70
Outdoor intake air WB temperature (°F)
0.6
0.8
0.9
1.1
Indoor intake air DB temperature (°F)
0.6
0.7
1.0