Zoned Comfort Solutions® The smartest way to heat and cool any space
Take full control of your monthly bills and comfort with roomby-room control – a more efficient way to cool and heat your home or business. Unmatched Quality, Uncompromising Control Mitsubishi Electric is the top selling brand of zoned air conditioning and heating systems. You will enjoy cleaner air and superior control of cooling, heating and your monthly energy bill. In addition to being quiet, intelligent and efficient, our systems provide extraordinary service life for a lower cost of ownership.
Ducted Unit Ceiling Cassette 69˚F Floor-mount Unit 70˚F OFF 68˚F EZ FIT® Recessed Ceiling Cassette 1
Mitsubishi Electric systems use the minimum amount of energy needed to maintain your desired temperature.
How It Works Technology that puts comfort in your hands The essential components of a zoned air conditioning and heating system are the outdoor unit, the indoor unit and the smart comfort controls. The system operates by transferring heat to and from an outdoor unit to one or more indoor units. The units are connected by pipes containing refrigerant, a substance that absorbs heat.
The INVERTER Advantage Maximize efficiency and minimize your power bill. Reduce energy consumption by up to 40% annually with the INVERTER Advantage The less sophisticated, conventional air conditioning and heating systems run at full power until it reaches a set temperature and then stops, only to turn on again — sometimes within an hour — as the temperature becomes uncomfortable. Each time the system turns on its noisy outdoor unit, it uses more energy than it does during regular operation.
Ducted Air Handler systems deliver efficient comfort using your home’s existing ductwork.
It’s never been easier to keep everyone in your house comfortable, without spending a fortune on energy bills.
Understanding Zoning Units are available in single-zone and multi-zone versions Single-zone units One outdoor unit connects to one indoor unit With single-zone equipment, one outdoor unit connects to one indoor unit (see pages 18-25 for indoor units available). This option is ideal if you only need cooling and heating in a single space. With multi-zone equipment, one outdoor unit can connect up to eight indoor units.
Air Filtration Breathe easier with advanced filtration Our indoor units don’t just keep each room in your home at the perfect temperature; they continuously clean the air of allergens, dust, viruses and bacteria. Each room’s indoor unit is equipped with filters to directly improve your air quality while the conventional system has only one filter installed in the central unit. The filters are washable and last up to 10 years, which saves you money on maintenance.
Indoor units offer a variety of filtration options that continuously clean the air of allergens, dust, viruses and bacteria.
Technology The world’s smartest comfort solutions 3D i-see Sensor® Available with select indoor unit models, the 3D i-see Sensor increases the sensitivity of the system to your comfort needs and gives you opportunities to further customize comfort in your home or business. The sensor scans each room to produce a complete thermal profile that includes heat signatures based upon size, temperature and movement.
Advanced Occupant Detection Select ceiling-recessed indoor unit models are equipped with sensors that rotate a full 360º in three-minute intervals. This allows the units to detect human body temperature and use an algorithm that calculates the number of people in the room as well as their positions. Direct Airflow Indirect Airflow If you want your indoor units to send airflow directly toward occupants. This setting is useful when the occupant does not wish to have air blowing directly on them.
Controllers Control your comfort and easily monitor energy usage and consumption kumo touch™ Wireless Controller Deluxe MA Controller Touch MA Controller Simple MA Controller Easy to operate with a traditional user interface, the kumo touch™ Wireless Remote Controller Kit can be mounted on any wall. With no need to pull a wire toward hardto-reach locations, this wireless controller is great for retrofits.
Comfort control in the palm of your hand. kumo cloud® is part of the intelligence behind the system. With a patent-pending algorithm, kumo cloud automatically switches the system from cooling mode to heating mode and back as needed to give you perfect year-round comfort. When paired with kumo station®, kumo cloud can also automatically manage the operation of third-party furnaces, boilers, heaters, humidifiers, dehumidifiers and ventilators.
Our outdoor units operate as low as 46 decibels — the level of a typical conversation.
Outdoor Units Which outdoor unit is right for you? Say goodbye to the noisy outdoor units of conventional systems. Our outdoor units operate as low as 46 decibels — the level of a typical conversation. Each unit has a space-saving compact design and is available in a variety of sizes to suit different cooling and heating requirements. Single-Zone Available as a cooling only, heat pump or a hyper-heating heat pump, each outdoor unit connects to a single indoor unit through refrigerant lines.
With our wide variety of stylish indoor units, comfort and efficiency never looked so good.
Indoor Units Which indoor unit is right for you? With Mitsubishi Electric you can choose from a wide array of indoor units that reflect the cooling and heating needs, aesthetic and purpose of your space. Key features As you look at the styles of indoor units on the next few pages, these icons will indicate what options and capabilities are available for the units in each series. A series may include multi-zone and single-zone options as well as units of varying sizes.
Indoor Units Wall-mounted Units Wall-mounted units are the most versatile and popular style of indoor units. Slim, stylish and equipped with filters to continuously clean indoor air, these units sit high on the wall and are ideal for conditioning smaller areas such as individual rooms in a home, office or store. This indoor unit option does not require ductwork. FS Model Karen Culp Photography | KCULP.
Indoor Units HM Model This basic heat pump is available as a single-zone unit and keeps operating noise as low as 22 decibels. JP Model Available as a single-zone 115 volt heat pump are ideal for homes or hotels with electrical service restrictions. D Model These large capacity standard wall-mounted units have Wide Airflow capabilities to ensure air reaches every corner of a room and includes the Powerful Mode feature for rapid cooling and heating.
Indoor Units Ceiling-mounted Units Ceiling-mounted options include ductless cassettes installed flush to the ceiling and ductless ceiling-suspended units for light commercial settings. MLZ Model Ideal for retrofits, these multi-zone cassettes feature a sleek, narrow-body design resting flush to the ceiling with a service panel easily accessed from below.
Indoor Units Designed for large, open floor plans such as school, office and retail settings, these multi-zone cassettes neatly fit into standard ceiling tiles. Four-way air outlets with individual vane settings permit up to 72 different airflow patterns. Additional comfort and efficiency controls are available if installed with the optional 3D i-see Sensor®.
Indoor Units Floor-mounted Units These slim, floor-mounted units can be mounted partially recessed into the wall. Best used in a home, store or restaurant space, this is a great option if you are replacing radiators or want a unit in your sun room or attic. Available as single-zone and multi-zone models, these units are equipped with H2i Hyper-Heating® technology, rapid heating capabilities and a multi-flow vane to control airflow throughout a space.
Indoor Units Ducted Air Handlers Designed with compact cabinets, these units can provide powerful and efficient cooling and heating with or without ductwork. Ideal for residential, store or restaurant settings, a ducted air handler with INVERTER-driven capabilities is a perfect solution for new buildings. This is also applicable for upgrading or replacing furnace systems and air handlers.
r lte g Fi tin r lte er De rF Ai ch te Ca ilt in at Fi in rC ie Pl rr no Ba Na Du al n Bl ue m Fi an d Co De um oa n tio ol Fu nc or ™ Ec ee on o Se ns Se ee i-s i-s Zoning ns Hy ne 3D M ul ti- zo ne zo ti- ul M or ® pe pe rH r- H ea t ea t ea Hy -z le ng Si le -z on on e e Hy at He ng Si Si ng le -z on e Co e on le -z om ng Si pe Pu g in ol l cia m er ® tC ST AR Li ER EN gh GY ss le Du ct Unit Type rH m O p
Air Quality • • • • • • Air Distribution • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Convenience • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25 Sl ee p M Re od e t tu ov ra ar pe st em er er re e g r En lte y in Fi rg ol od e Co M er d e e od od ee ge m m Sp an Ti Ti et Ch ff -t to w Au Lo O to n/ y tS
Glossary ENERGY STAR®: the unit has received ENERGY STAR® certification 3D i-see Sensor®: scans each room to produce a complete thermal profile that includes heat signatures based upon size, temperature and movement Econo Cool: adjusts the amount of air directed towards occupants based on the air-outlet temperature Demand Function: when the unit is equipped with a commercially available timer or an On/Off switch added to the outdoor unit, a signal input from the outside can help reduce energy consumption Bl
One of the best warranties in the business. Mitsubishi Electric products are supported by a trusted team of Diamond Contractors®. When you choose to work with a Diamond Contractor, not only do you get the benefit of their experience and expertise, but you can also increase the warranty on your purchase to 12 years.
mitsubishicomfort.com © 2021 Mitsubishi Electric Trane HVAC US LLC. All rights reserved. Mitsubishi Electric, Lossnay, and the three-diamond logo are trademarks of Mitsubishi Electric Corporation. CITY MULTI, kumo cloud, kumo station and H2i are registered trademarks of Mitsubishi Electric US, Inc. Trane and American Standard are registered trademarks of Trane Technologies plc. All other product names mentioned herein are trademarks or registered trademarks of their respective owners.
