M-Series Brochure

4
Maximize eciency
and minimize your
power bill.
The less sophisticated, conventional air conditioning
and heating systems run at full power until it reaches a
set temperature and then stops, only to turn on again
— sometimes within an hour — as the temperature
becomes uncomfortable. Each time the system turns on
its noisy outdoor unit, it uses more energy than it does
during regular operation.
The INVERTER, at the heart of our system, eliminates
the wasteful start and stop cycle. Just as your heart
always beats, but automatically beats faster when you
exercise, the system is always active with the INVERTER
enabling it to automatically adjust conditioning when
its temperature sensors detect even subtle changes.
You don’t have to think about it and the system is so
quiet you won’t hear it either. Rooms are cooled and
heated faster and more efficiently. The INVERTER
regulates energy consumption so that the system
only uses the precise amount of energy needed to
keep each room at the temperature you choose. This
is greener and more sustainable than running at full
power like conventional systems and can reduce energy
consumption by up to 40 percent.
INVERTER reaches
set point faster
Poor temperature control means
inefficient use of energy
Minimal temperature
fluctuation means
efficient use of energy
ON ON ON ON
OFF OFF OFF
INVERTER vs. Conventional System Operation
INVERTER Conventional Set point
Set point
Reduce energy
consumption
by up to 40
%
annually with
the INVERTER
Advantage
The INVERTER Advantage