Instruction manual
Technical Service Bulletin
Page 1 of 10
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link,
MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
Copyright 2012, Mitsubishi Motors North America, Inc.
Continued
(3788)
SUBJECT:
IPODr ADAPTER INFORMATION
No: TSB−12−66−001
DATE: April, 2012
MODEL: See Below
CIRCULATE TO: [ ] GENERAL MANAGER [ X ] PARTS MANAGER [ X ] TECHNICIAN
[ X ] SERVICE ADVISOR [ X ] SERVICE MANAGER [ X ] WARRANTY PROCESSOR [ ] SALES MANAGER
PURPOSE
To assist Mitsubishi service technicians in the installation, operation and troubleshooting of the Authorized
Mitsubishi Accessory iPod Adapter (p/n MZ607411EX).
AFFECTED VEHICLES
2006−2012 Eclipse
2007−2012 Eclipse Spyder
2006−2011 Endeavor
2006−2012 Galant
BACKGROUND
The Authorized Mitsubishi iPod Adapter accessory
(adapter) connects to certain audio systems in affected
vehicles using a DIN cable. When certain Apple, Inc.
devices (iPodr, iPod Touchr, iPhoner) are connected to
the adapter, music tracks can be selected and played
back through the vehicle’s audio system. Functions are
selected using the audio unit’s CD controls (e.g. track,
skip, forward, volume, etc.). Actual functions may vary
between models, model years and audio head units.
DIAGNOSTIC OVERVIEW
Confirm the customer’s comments regarding adapter operation.
1. Confirm the device (iPod) is listed in the “Compatible Devices” chart on page 2.
2. Confirm the audio unit is listed in the “Compatible Head Units” chart on page 3.
3. Connect the iPod to the dock connector.
NOTE: Ensure the iPod’s volume control is set to at least 90% of maximum.
4. Toggle the CD button until CD2 is displayed on the audio screen.
5. Operate the vehicle’s audio controls to confirm adapter operation.
6. Use the information in this TSB and other sources to confirm proper installation and connection of the
adapter and the iPod.