Instruction manual

16
Resetting the values
You can reset the values of printer brightness, printer
contrast, sharpness and function mode settings.
Turn off the power.
While pressing the FUNC button, turn on the power.
The display by the indicator changes from to , and the values are reset to the
default setting.
Automatic restoration to the standby status from the adjust-
ment or setting mode
Whenever the front dial and buttons are untouched for more
than 20 seconds during adjustment, the printer automatically
returns to the standby status (Indicator display : ).
In this case, the new value is not memorized and the setting
goes back to the previous value.
Restarting the printer
You can restart the printer by pressing and holding down the
COPY/RST button for about 2 seconds.
When the printer restarts, the ongoing printing is cancelled,
the number of printings is reset and the printer returns to the
standby status.
The values set by the front buttons are not reset.