Instruction manual

21
FRANÇAIS DEUTSCHITALIANO
NEDERLANDS
ESPAÑOL ENGLISH
Cause/Error display Symptom/Remedy
Button input
error
[Symptom]
• An alarm tone is heard once in the following cases.
• The indicator displays “ ” for one second and the button operation
becomes invalid.
• During adjusting the printer brightness or the printer contrast,
the adjustment dial exceeded the upper limit value (LED display
: ) or the lower limit value (LED display : )
• During adjusting the sharpness, the adjustment dial exceeded
the upper limit value (LED display : ) or the lower limit value (LED
display : ).
• While the adjustment dial operation is set to invalid by
the “adjustment dial lock setting” of the FUNC button, the
adjustment dial is turned (clockwise or counterclockwise).
• During setting the number of copy printing, the COPY button
exceeded the upper limit value (LED display :
).
Cause/Error display
[Symptom]
• When the door opens, an alarm tone is heard.
The indicator displays “ ”.
In this case, all the buttons and switches become non-functional.
• If this error occurs while more than one copy is being printed,
printing is cancelled at the occurrence of the error.
Symptom/Remedy
[Remedy]
Close the door.
When the door is closed while the printing of more than one copy is
being printed, an alarm tone is heard.
After the error is resolved, the unit resumes printing from the
interrupted image and fi nishes printing all the outstanding images.
Door error