Instruction manual

16
Resetting the values
You can reset the values of printer brightness, printer
contrast, sharpness and function mode settings.
Turn off the power.
While pressing the FUNC button, turn on the power.
The display by the indicator changes from to , and the values are reset to the
default setting.
Automatic restoration to the standby status from the adjust-
ment or setting mode
When left without any operation of buttons, and switches
under the following conditions for more than 20 seconds, this
unit automatically returns to the standby status (Indicator
display : ).
In this case, the newly set value is not memorized and the
setting goes back to the value that was set before change.
• While adjusting the printer brightness or printer contrast
• While adjusting the sharpness
• While setting the gamma curve
• While selecting the button lock setting mode
• While selecting the USB iSerial number setting mode