® OWNER MANUAL FOR USER 2.10 ATTENTION ● The Wireless Interface 1 and 2 must connect to a 2.4 GHz Wi-Fi network. ● The Wireless Interface 1 and 2 will not work on a 5 GHz Wi-Fi network. ○ The Wireless Interface 1 and 2 can only connect to Wi-Fi channels 1-11. ● For the best performance connect the Wireless Interface 1 and 2 to a 2.4 GHz only SSID, but there are some multi-band Wi-Fi networks that can correctly manage a 2.4 GHz only device. ○ Please verify if your multi-band Wi-Fi router can manage 2.
Contents kumo cloud® .......................................................................................................................................................3 Before you Begin................................................................................................................................................3 Get Started.........................................................................................................................................................
Sites Zones Edit Home RH 45% Home RH 45% Maria Ann’s Room 70° RH 44% RH 44% Family Room 70° RH 45% Master Bedroom Dining Room Kitchen 70° 70° Office Guest Rooms 2nd Floor 70 ° RH 45% 65° Home Another Room OFF Here Program Settings kumo cloud® The kumo cloud app works with the Mitsubishi Electric Wireless Interface to enable remote control of Mitsubishi Electric Cooling & Heating equipment from a smart device. The app can be used as the only controller or with compatible controllers.
Get Started Download the App Visit kumocloud.com. Locate the link to download the app from the App StoreSM or Google Play™. The app is available for iPhone® 7 and newer, running iOS 10.0 and above, and Android™ smartphones running Android 5 and newer. Create an Account Create Account Back Adjust the temperature from anywhere with kumo cloud .® Email john@sample.
Log In Log In Email john@sample.com 2 Password At least 3 characters LOG IN 3 CREATE ACCOUNT FORGOT PASSWORD 1 If you already have a kumo cloud® account or have more than one account, simply log into your account from the app. 1. Open the kumo cloud app. 2. Type the appropriate email address for the kumo cloud account you want to access and enter the password. 3. Tap Log In. Note: If you receive a message indicating the email and password combination are incorrect, try again.
Reset Password Forgot Password Log In Email john@sample.com Password At least 3 characters app.kumocloud.com No problem. Enter your email. Then use the link to enter a new password. Email kumo cloud Reset Password 4 New Password SAVE 5 LOG IN CREATE ACCOUNT 1 SEND RESET LINK FORGOT PASSWORD LOG IN 2 3 1. 2. 3. 4. 5. If you’ve forgotten your password, on the Log In screen, tap Forgot Password. Enter the email associated with your account and tap Send Reset Link.
Control Whole Home or Individual Zone Zones Edit Zones Thermostat Edit Master Bedroom Home RH 57o 2 Home Master Bedroom DEFROST 65 ° 1 The Home screen Home Maria Ann’s Room Family Room Dining Room Kitchen 70° i 70° 65°-73° Now: 63˚ Mode: Auto 70° 3 70° Fan speed: High Guest Rooms Vent: Swing Program 2nd Floor Another Room 4 5 OFF Here Settings Home Program Settings will display your sites and/or zones.
Modes Zones Thermostat Edit Master Bedroom Zones Thermostat Edit Master Bedroom RH 57% 65° Now: 72° Now: 66˚ Mode: Heat Mode: Fan only OFF OFF More... Less... Fan speed: High Vent:Home Swing Mode Program Settings Vent:Home Swing Program Settings Description Heat Engages the heating function of your Mitsubishi HVAC equipment. Cool Engages the cooling function of your Mitsubishi HVAC equipment. Auto Engages the heating and cooling functions of your Mitsubishi HVAC equipment.
Dual Setpoint Zones Edit Thermostat Master Bedroom RH 57% 1 65° Now: 2 ˚ Mode: OFF More... Fan speed: Program Settings If you select the Auto mode, the heating and cooling setpoints are displayed. kumo cloud® switches between heating and cooling, based on these setpoints, to stay within your selected temperature range. Note: • The dual-setpoint Auto mode scheme that kumo cloud uses is not compatible with the single-setpoint Auto mode available on other controllers.
Fan Speed Zones Thermostat Edit Master Bedroom RH 57o 65°-73° Now: 63˚ Mode: Auto 1 Fan speed: High 2 Vent: Swing Home Program Settings Fan speed allows users to increase or decrease the force of the air coming out of the unit. 1. Vent 2. Vent allows the user to control the direction of the air blowing out of the unit. Options vary by equipment. Specifications are subject to change without notice. 10 © 2021 Mitsubishi Electric US, Inc.
Organize Zones Depending on your home, you may have one or many zones, individual areas cooled and heated with an indoor unit.
Add a Group Zones 5 Edit 2 Cancel Home Home RH 45% Master Bedroom DEFROST RH 44% 65° Home RH 44% Maria Ann’s Room 70° RH 44% Dining Room Done Cancel Add Group Home Summer House + i Family Room 70° Move Zone 70° Guest Rooms 2nd Floor + Master 70° Dining Room 70° 70° Another Room OFF Here Settings 3 New Group 65° RH 45% Kitchen 70° Program Zones Home Group Name 4 Home 70° 5 CREATE GROUP Kitchen Want to move a group to Home ? OFF 1st Floor Another Room 2nd Fl
Delete a Group Zones 5 2 Cancel RH 45% Master Bedroom DEFROST RH 44% 65° Home RH 44% Maria Ann’s Room 70° RH 44% Dining Room 70° Guest Rooms Program Zones Done Cancel Summer House Home Home 1 Edit i Family Room 70° RH 45% Kitchen 70° + Move Zone 65° Master 70° 2nd Floor Another Room OFF Here Settings Home + New Group 70° Dining Room 370° Remove Group Bedrooms Should Bedrooms be permanently deleted? Home 70° DELETE GROUP 4 Kitchen OFF 1st Floor Another Room 2nd
View Sites Zones 3 2 Edit Zones 5 ® Home Lake House Home 65° Program 1 Settings Cancel Zones Done Home Maria Ann’s Room Family Room Dining Room Kitchen 70° 70° Guest Rooms 2nd Floor 70° Program Add Site Cancel ® Home Master Bedroom DEFROST Home Edit i 70° + 4 New Site ® Site Name Home Lake House 5 CREATE Another Room OFF Here Settings Home Program Settings Home Program Settings 1 If kumo cloud® is set up at more than one location on your account, the add
Move Zones to a Site Zones Edit ® Home Lake House 2 Zones 5 Home 65° Program Settings 1 Edit Cancel Home Maria Ann’s Room 70° i Family Room 70° Dining Room Kitchen 70° 70° Guest Rooms 2nd Floor Program Zones Done 4+ Move Zone 65° Master 70° Another Room OFF Here Settings Home + New Group 70° Dining Room 70° Move Zone Cancel Move to: Home Summer House Home Master Bedroom DEFROST Home 3 70° 70° Family Room 65° Home 70° Master Bedroom 570° Dining Room 65
Program kumo cloud® can be programmed to adjust settings automatically, following a customized schedule. *For overall energy-savings, adjust baseboard heat, gas or other auxiliary heat so it doesn’t overrun while the main system is set back. Set a New Event Events Back Location Cancel Back Repeats Cancel Back Begins Cancel Home Which zones should be set? Edit Program: Home: all zones Set new event Everyday Start 1. 2. 3. 4. 5. 6.
Note: • The selected event settings persist unless and until another event or user changes the settings. • If an MHK2 controller controls the event settings, the events programmed through kumo cloud® are disabled.
Create a Hold Zones Edit Thermostat Zones Edit Thermostat Hold Duration RH 5 % Now: ° Now: ˚ ° ° o Now: o Hold Set Hold Duration Mode: Mode: Fan speed: Fan speed: Vent: Vent: Settings Edit Thermostat RH 5 % Hold Until 3.
Check Program Sites Events Home Events 6 Program: On Event Zones Location: Bedrooms, Bathr ... Edit Set new event 2 6:00 78° Bedrooms, Laundry Room, ... Begins: 8:00 a.m. 6 Events Sites Home Program: On Done Program on Mode: Auto 4 Delete event 8 7 Now: 63˚ Setting: 75° Heat Set new event Fan speed: High 78° Bedrooms, Laundr Vent: Swing Program Settings 1 1. Master Bedroom 65° 3 Sunday Home Edit Repeats: Monday, Tuesda ... 6:00 78° Bedrooms, Laundry Room, ...
Settings Settings Overview Settings 2 My Account 3 Filters: Dirty in 2 zones Help: 2 errors 4 System Setup 5 Notifications 6 Legal 7 Home 1. 2. 3. 4. 5. 6. 7. Program Filters Sites Settings 1 Filters Reminder Living Room: Dirty Jones’ House A reminder to clean the filter shows after 100 hours of cooling or heating.
Equipment Errors Zones Sites Edit Settings Settings My Account HV ’sAC Service: Contact A ndy’ Marias Ann Room 000000-0000 Familyi Room Dining Master Kitchen Room Bedroom DEFROST VIEW ERRORS System Setup 1 70° 70° Guest Rooms 2nd Floor CLOSE WINDOW 65° Home 2. 3. 4. 5. Program Another Room OFF Here Settings Open PDF Manual 3 70° 70° CALL NOW 1. Indoor/outdoor commun ...
System Setup Choose Fahrenheit or Celsius Settings Settings Setup My Account Units: Fahrenheit Filters: Dirty in 2 zones Lock to single zone Settings 3 Edit Fahrenheit Done 5 4 Wi-Fi: Problem Help: 2 errors IFTTT 2 System Setup Notifications Transfer Ownership Wi-Fi: Problem IFTTT Installer Settings Legal Home 1. 2. 3. 4. 5. Program Settings 1 Program Settings Home Program Settings Tap Settings. Tap System Setup. Tap Units. Choose Fahrenheit or Celsius. Tap Done.
Lock to Single Zone Settings Settings My Account Setup System Units: Fahrenheit Lock to single zone Filters: Dirty in 2 zones Edit 3 Wi-Fi: Problem Help: 2 errors IFTTT 2 System Setup Notifications Lock Lock Back Would you like to limit this device to one zone and hide central control of other zones? To undo the lock, choose Unlock and enter the kumo cloud® password for Home Dining Area Bedrooms loggedinuser@emailserver.com.
Unlock from Single Zone Unlock 1 Guest Bedroom RH 57% 65° Unlock Cancel Features on this device have been limited by loggedinuser@emailserver.com. Password Enter a valid password. 2 Now: 63˚ UNLOCK Mode: Heat 3 FORGOT PASSWORD Fan speed: High Vent: Swing Unlocking the Single Zone will allow access to the rest of the kumo cloud® app and control of the entire site (or house). This action is performed from the locked zone screen (i.e. Guest Bedroom).
Check Connection to the Wireless Network Settings Settings Setup Units: Fahrenheit My Account Edit Lock to single zone Filters: Dirty in 2 zones Wi-Fi: Problem Help: 2 errors IFTTT 2 System Setup 3 Transfer Ownership Installer Settings Notifications Legal Home Program Settings 1 Home Program Settings If none of the zones respond to the mobile app, check the router to kumo cloud® connection.
Reconnect the Wireless Network Setup Connect Wi-Fi Cancel Router to kumocloud No signal What Wi-Fi network should kumo cloud use? Check local wireless network. Then check connection with the Internet Service Provider. Network name JonesHomeWifi 5 Password 4 Program Cancel Back Home Program 8 Dining Room 6 Master Suite 7 NEXT Settings Cancel Connect the other zones in your site. Move closer to source as needed. Please elect your first zone to test your connection.
Turn Wireless Interface 2 LED Lights On or Off Settings Settings Setup Edit Wi-Fi: Problem Help: 2 errors LED Lights 2 System Setup Notifications Wireless Interface 2 LED Lights These controls are intended for Wireless Interface 2 and higher.
Use IFTTT IFTTT (If This Then That) Applets integrate third party devices and services with the kumo cloud® app and enable you to automate actions based on specific triggers. For example, you can choose to receive automatic email notifications when the temperature of a zone gets too high or too low. The following applets are available in the kumo cloud app.
Use IFTTT Applets Settings Settings Units: Fahrenheit My Account Back Setup Edit IFTTT Back These are the Applets avaialble through IFTTT. Tap module or switch ‘On’ or ‘Off ’. These are the Applets available through IFTTT. Tap module or switch 'On' or 'Off.
Transfer Ownership Settings Settings Setup Transfer Back Edit Units: Fahrenheit Back Lock to single zone Invite the new owner to control the cooling and heating. You keep control until they accept. Filters: Dirty in 2 zones Wi-Fi: Problem New owner’s email Help: 2 errors IFTTT My Account 2 System Setup Notifications johnjones@email.com Transfer Ownership 3 Transfer A link to control the cooling and heating at Lake House has been sent to johnjones@email.
Set Notifications Settings Settings Notifications My Account Back 3 Filters: Yes Errors: Yes Filters: Dirty in 2 zones Yes Low Temperature: No High Temperature: No Help: 2 errors Filters Show an alert when a filter needs to be cleaned? 4 No Wireless Signal Sensor Lost: Yes System Setup Wireless Signal Low Battery: Yes 2 Notifications MHK2 Thermostat Low Battery: Yes Legal Home Program Settings Home Program Settings Home Program Settings 1 kumo cloud® can send push notificatio
Accessories Wireless Temperature and Humidity Sensor For kumo cloud® The PAC-USWHS003-TH-1 Wireless Sensor is a wireless temperature and humidity sensor that is designed to provide remote sensing capabilities to the Wireless Interface. This is an optional part. Up to one Wireless Sensor may be configured for each Wireless Interface. The Wireless Interface should already be setup within kumo cloud prior to configuring the Wireless Sensor.
3. Nudge the expired battery out by pushing through the holes until it slides free of the compartment. 4. Replace with a new battery, with the positive (+) side facing up and the negative side facing the back of the electronic board. You will hear a faint chime/ringing sound as the battery is inserted. This will indicate that the battery has been installed correctly. 5.
kumo station® kumo station integrates the control of your Mitsubishi Electric HVAC System with third-party backup heaters, humidifiers, dehumidifiers, ventilation systems and hydronic heaters. Contact your Mitsubishi Electric HVAC installer in order to add kumo station to your site.
Humidifier Humidifier Back Now: 30% Mode: Auto 1 OFF 2 Auto Setting: 40% 40% 45% Home 50% Program MORE 3 Settings First, follow the steps in the Control kumo station Accessory section. Then, select the humidifier Mode. OFF: Do not run the humidifier. 1. 2. Runs the humidifier as needed to meet the target relative humidity percentage. When the target percent humidity is reached, the humidifier will turn off. 3. When the mode is set to © 2021 Mitsubishi Electric US, Inc.
Dehumidifier Back Dehumidifier Now: % Dehumidifier 4 Mode: Auto 1 2 OFF Auto Setting: 65% 3 % Home % Program % Less Settings First, follow the steps in the Control kumo station Accessory section. Then, Select the Mode for the dehumidifier: 1. Runs the dehumidifier as needed to meet the target relative humidity percentage. 2. OFF: Disable the dehumidifier. 3. When the mode is set to Specifications are subject to change without notice.
Ventilation System Back Ventilation Outside Air Temperature: 73° Vent Duration: Scheduled 1 OFF 1hr 2hrs 3hrs More.. Vent Schedule : 24 hrs/day Start 2 12:00 AM End 12:00 AM 3 Air Cycle: Home 20 mins/hr Program Settings First, follow the steps in the Control kumo station Accessory section.Then, 1. Select the Duration to run the ventilation system. On: Run the system on schedule indefinitely. X hrs: Run the system for a fixed amount of time. Off: Disable the ventilation system. 2.
FAQs Can I use both the remote controller and the app? Yes. Whichever control was adjusted most recently takes effect. Can I control the same home from multiple smartphones? Yes. Use the same email and password to log in from the second device. If service from the internet service provider (ISP) goes out will kumo cloud still work? Yes. As long as the local wireless network is functioning, you can change the temperature using a smartphone or tablet from inside the house.
What is the standard setpoint range of the Auto mode? In Auto, the setpoint range is slightly more constricted because Google will assign 2 setpoints on either side of your requested target value. So if you request the maximum setpoint available, Google will try to use a range of a few degrees above and below your target, and since the one above the maximum is out of bounds for the unit, the command will fail.
For more information about using the kumo cloud® skill with Amazon Alexa, in your Alexa account go to Skills > Your Skills > Mitsubishi Electric US kumo cloud. How do I change temperature units using Amazon Alexa? In the US, Fahrenheit is the default temperature unit. To change Fahrenheit to Celsius: 1. On your computer, using any browser, go to the Alexa portal at alexa.amazon.com and sign in to your account. On your smartphone or tablet, sign in to the Amazon Alexa app. 2.
This product is designed and intended for use in the residential, environment. *Bouchell MP, Parker DS, Anello MT. Factors influencing space heat and heat pump efficiency from a large-scale residential monitoring study. Proceedings of the 2000 ACEEE summer study on energy efficiency in buildings; 2000. © 2021 Mitsubishi Electric US, Inc. kumo cloud is a registered trademark of Mitsubishi Electric US, Inc. iPhone, Apple and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.
