Kumo Station Submittal

ManualsBrandsMitsubishi ManualsCoolingKumo Station™ Controller

Table Of Contents

Job Name:

System Reference: Date:

SPECIFICATIONS

• 4 channel equipment controller with outside air temperature monitoring

• Manages and stages heat pump and third party supplemental heat

• Setup available through kumo cloud

app

• Communicates with other equipment wirelessly without internet connectivity

• Able to connect non-powered and powered equipment

• LED function settings

– Equipment communication

– Equipment status

• Patent pending algorithm to control system changeover

– Reduces system changeover occurrence

– Can set priority zones

• 4 dry contact outputs

• Minimum run time can be changed in 10 minute intervals to avoid frequent system changeovers

• Compatible with Mitsubishi Electric CITY MULTI

units. Contact Mitsubishi Electric representative for more information.

• Ambient temperature range from 32°F (0 °C) - 104°F (40 °C)

• Maximum relative humidity 80%

•

Avoid installing in an area of direct sunlight or sources of heat

• Must take into consideration other areas of electronic noise

• Install indoors

REQUIREMENTS

• Wireless Interface (PAC-USWHS002-WF-1) connected to kumo station

PAC-WHS01HC-E

KUMO STATION

Summary of content (5 pages)

PAGE 1
PAC-WHS01HC-E KUMO STATIONTM Job Name: System Reference: Date: SPECIFICATIONS • • • • • • • • • • • • • • • 4 channel equipment controller with outside air temperature monitoring Manages and stages heat pump and third party supplemental heat Setup available through kumo cloudTM app Communicates with other equipment wirelessly without internet connectivity Able to connect non-powered and powered equipment LED function settings – Equipment communication – Equipment status Patent pending algorithm to cont
PAGE 2
PAC-WHS01HC-E KUMO STATIONTM, CONT. ADVANCED FEATURES • • • • • • Emergency Operation Switches Ability to override the output status of the 4 equipment controller outputs Can open or close the contacts at channels 1, 2, 3, 4 to prohibit or permit operation Auto mode will allow for remote setting of channels 1, 2, 3, 4 Channel selection Able to be controlled through kumo cloudTM app – Requires kumo cloud app version 2.
PAGE 3
DIMENSIONS: PAC-WHS01HC-E • Dimensions W x D x H: 5-31/32" x 2-3/8" x 12-1/16" (152 x 60 x 306 mm) • Weight: 3.97 lbs (63.5 oz) (1.8 kg) Unit: inch (mm) 6-11/16“ (170) 13/32“ (10) Screw 3-31/32”(100.6) 12-25/32“ (325) 9-31/32”(253.6) 3/16“ (5) Spring washer Flat washer Wall 4-5/32”(105.2) post Wall Screw(4×30), Spring washer, Flat washer post Level difference: 0±1/32“ (1) Screw (4×30) Specifications are subject to change without notice. Copyright © 2017 Mitsubishi Electric US, Inc.
PAGE 4
WIRING DIAGRAMS: PAC-WHS01HC-E –2. Wiring 3 2. Wiring Diagram CN90B (WH) Ch1 Ch2 Ch3 Ch1 Ch4 Ch2 Ch3 Ch4 CN90B To optional outdoor temperature sensor To indoor unit Connect to CN105 (if required) To Wireless Interface CN460 (WH) CN460 (WH) LED7 F1 3.15A 250V LED2 F2 10A 250V Ch4 Ch2 8 24V COM Ch1 24 V AC Transformer Ch3 Connect to equipment Note: Connect surge absorber according to the load at site.
PAGE 5
COMPATIBILITY CHART Table 1. CITY MULTI® PMFY-NMBU PEFY-NMU PEFY-NMAU Table 2. P-Series (E) NO PCFY- NGMU (E) NO (ER5) OK PCFY- NKMU (E) NO (After April 2012) (E.TH) NO (NMU-E) NO (ER1.