Controls A Comprehensive Range of Control Options Air Conditioning Commercial Heating Domestic Heating Photovoltaics
The Importance of Control The need for control is paramount in order to optimise the performance of any air conditioning system and minimise its running costs and the emissions generated. Mitsubishi Electric offer a wide range of control options designed to do just this. Operating an air conditioning system without the right control can prove costly. It’s therefore important to ensure that every system is correctly specified to the degree of control it requires.
Which Controls Product for Which Application? Which Controls Product for Which Function? It is really important to match the right control with the right application. From a hotel to a retail application, the solution will be different and the right control must be applied. Application Small Medium Application Large Notes MELCOTEL A hotel usually requires interfacing with a key card system and window contact. The Melcotel has been designed to do just this for up to 250 City Multi indoor units.
A Wide Range of Control Options The need for control is paramount in order to optimise the performance of any air conditioning system and minimise its running costs. Mitsubishi Electric offer a wide range of control options designed to do just this. With the array of comprehensive control systems available from Mitsubishi Electric, it becomes simple to design and install air conditioning systems. From a simple hand held controller to an AG150 system you are in control.
AT50 Controller Our air conditioning systems are supported by a multitude of remote controllers. Each remote controller type, whilst being able to support the general control and monitoring functions for a group of indoor units, can also offer other unique operational features.
IO Interface The new IO interface has been developed to allow third party systems, for instance BEMS companies, to easily control and monitor our air conditioning systems using simple volt free contacts and 0 to 10VDC signals. By working very closely with our main retail clients we have added some beneficial energy saving features, whilst still offering an acceptable level of control for retail applications.
AT50/AG150 Controller Touch Screen Examples Touch Screen Centralised Controller with WebServer Capabilities AT50 Home Screen 1 AG150 Home Screen 1 AT50 Home Screen 2 AG150 Home Screen 2 AT50 Home Screen 3 AG150 Home Screen 3 AT50 Indoor Unit Settings AG150 Indoor Unit Settings AT50 Scheduling AG150 Scheduling The AG150 Mitsubishi Electric centralised controller offers a large 9 inch touch screen display with easy control of up to 50 indoor units.
PAC-YG50ECA AG150 Expansion Controller Centralised Controller with WebServer Capabilities The PAC-YG50ECA expansion controller allows the AG150 to monitor and control up to 150 indoors units. The GB50 has been developed to access all your control functions from the comfort of your own PC, without the need for a controller keypad or LCD display and at a very competitive price.
Login Monitor Air Conditioning - Overview PAR-21PC Desktop Remote Controller More and more customers are using the AG150/GB50 controllers directly from their computers, so Mitsubishi Electric has launched a new, even simpler alternative which presents the customer with what looks like a standard remote controller interface - on their PC desktop.
AG150/GB50 Melcotel Hotel Interface with Key Card System The new third party equipment interfaces allow the user to monitor and control third party equipment from the AG150/GB50 web pages. ETHERNET *NOTE 1 PAC-YG66DCA The MelcotelTM hotel interface allows a hotel (for example) to have more accurate control over its air conditioning. The MelcotelTM works in conjunction with the key card system installed in each bedroom in many hotels.
The MelcotelTM controller allows a hotel (for example) to have more accurate control over its air conditioning. When the unit has been switched ON by a user, the room is deemed as occupied and the MelcotelTM resets the air conditioning to predetermined settings (for instance AUTO, 21ºC). After a preset time, the MelcotelTM will switch OFF the unit automatically. When the room is unoccupied, the MelcotelTM will monitor the temperature in the room.
TG2000 Software with Energy Monitoring PC Based Software Package PC Based Software Package The TG2000 centralised PC based graphical software package allows the operator to control and monitor up to a maximum of 2000 indoor units. This software has been designed to connect directly to an air conditioning system via the AG150/GB50 controller, allowing the operator the required functionality to control and monitor the complete air conditioning system from a central location.
Energy monitoring is key to comply with Part L2 regulations. Some time ago we introduced the PAC-YG60MCA MNET interfaces, which can be connected anywhere on our MNET network and will monitor up to 4 pulse meters. These interfaces make installation easier, more cost effective and are shown in option A below. This year, all of our City Multi outdoor units now have a direct connection to pulse meters.
PC Based Software Package used to monitor and control multiple sites TG2000 Controls Range TG2000 WAN (Wide Area Network) Software Screenshots Display Whole Display Block The 2000 indoor units status may be shown on one screen. Block may be set for each area. Settings may be changed by one click of the mouse for each area. Display Floor Remote Controller Settings AutoCAD drawing may be imported to TG2000 to display floor screens.
BEMS BACnet Interface Controls Range BEMS BACnet Interface ® ® BAC-HD150 Procon BAC-IP/50 TM ® To further enhance our complete open system network offering, we offer a BACnet interface solution. Utilising the ASHRAE BACnet standard, complete control and monitoring integration can be achieved with up to 50 air conditioning units. ® ® To further enhance our complete open system network offering, we offer a BACnet interface solution.
® Procon BAC-A/50 BEMS LonWorks Interface ® LMAP TM ® A new BACnet Interface has been specially developed for the Mr Slim systems. The BAC-A/50 can control up to 50 individual systems. The Mitsubishi Electric LMAP continues to strengthen the ability of our products to interface with other third party building control systems using the globally recognised and accepted open network protocol Echelon LonWorks®.
BEMS Modbus Mr Slim Interface Procon MOD-IP/50 Procon A32M To further complement the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the Modbus range has been developed to accommodate the typical end-user needs as experienced within the UK market.
Procon A1M Procon KNX-EIB-IP-15/100 To further complement the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the Modbus range has been developed to accommodate the typical end-user needs as experienced within the UK market.
BEMS Trend Interface Procon KNX-EIB-A-1 Trend IQ3 Excite To further complement the existing control and interface product ranges being offered by Mitsubishi Electric to support their air conditioning systems, the KNX-EIB range has been developed to accommodate the typical end-user needs as experienced within the UK market. Mitsubishi Electric and Synapsys Solutions have been working together for the last six years to offer very competitive solutions for Trend users.
Procon Maxi M2M-IP/50 TM To offer remote management of its air conditioning units to companies with large numbers of dispersed offices, Mitsubishi Electric has adopted the M2M platform. The machine-to-machine (M2M) technology platform allows customers to integrate multiple sites into one network. The air conditioning units as well as third party equipment will be wirelessly connected to the M2M server and use the GPRS network to communicate.
M2M-Machine 2 Machine Web Screenshots MEUK Website Login M2M is accessible using MEUK website. A username and password is required to monitor and control sites. Monitor Active Alarms and Sites Status All sites are listed with active alarm sites. A site can be selected to monitor each system. Set Parameters Reports Indoor unit and third party equipment can be controlled from the Website. Reports can be generated for analysis.
Split-System A2M Interfaces Procon PANEL_RS_SMS TM The panel PANEL_RS_SMS replaces the previous run standby panels. The new panel is smaller and uses Micro M2M technology. The panel can control up to 8 indoor units and will send a text message under fault condition. The PANEL_RS_SMS does not need the SIM card to run. Procon PANEL_RS_SMS TM A1M The City Multi systems use advanced communication protocol called M-NET.
