Installation Manual
1
BH79J525H03
CITY MULTI Control System and Mitsubishi Mr. Slim Air Conditioners
Installation Manual
Wireless Remote Controller
PAR-SL100A-E
This installation manual contains only the description of how to install the wireless remote controller unit PAR-SL100A-E.
1 Safety Precautions
” described below thoroughly and then install the wireless remote controller unit PAR-
SL100A-E correctly.
1 Safety Precautions
WARNING
This symbol denotes what could lead to serious injury or death if you misuse the PAR-SL100A-E.
CAUTION
This symbol denotes what could lead to a personal injury or damage to your property if you misuse the PAR-SL100A-E.
WARNING
Ask your dealer or technical representative to install the unit.
Install in a place which is strong enough to withstand the weight of the
PAR-SL100A-E.
personal injury.
Never modify or repair the PAR-SL100A-E by yourself.
Consult with your dealer about repairs.
CAUTION
Flammable gases accumulated around the body of PAR-SL100A-E may cause
an explosion.
Do not use in any special environment.
Using in any place exposed to oil (including machine oil), steam and sulfuric
component parts.
Do not wash with water.
Do not install in any place at a temperature of more than 40 °C (104 °F) or
less than 0 °C (32 °F) or exposed to direct sunlight.
Ensure that installation work is done correctly following this installation
manual.
All electrical work must be performed by a licensed technician, accord-
ing to local regulations and the instructions given in this manual.
Do not move and re-install the PAR-SL100A-E yourself.
To dispose of this product, consult your dealer.
Do not install in any steamy place such a bathroom or kitchen.
Avoid any place where moisture is condensed into dew. Doing so may cause
Do not install in any place where acidic or alkaline solution or special
spray are often used.
Do not touch any circuit board with your hands or with tools. Do not al-
low dust to collect on the circuit board.
Do not touch any control button with your wet hands.
Do not press any control button using a sharp object.
2 !"
Parts Name Quantity
Wireless remote controller 1
Remote controller holder 1
2
Tapping screws 3.5 × 16 2
Only use LR6 AA batteries. Replace low batteries with new LR6 AA batteries. Observe the polarity of the batteries as indicated, and insert the nega-