Air-Conditioners Indoor unit PEA-RP·EA OPERATION MANUAL FOR USER For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
Contents 1. Safety Precautions ................................................................ 2 2. Parts Names ......................................................................... 2 3. Screen Configuration ............................................................ 4 4. Setting the Day of the Week and Time .................................. 4 5. Operation .............................................................................. 4 6. Timer ........................................................
2. Parts Names ■ Wired Remote-Controller “Sensor” indication Display Section Displayed when the remote controller sensor is used. Day-of-Week For purposes of this explanation, all parts of the display are shown as lit. During actual operation, only the relevant items will be lit. Shows the current day of the week. Time/Timer Display “Locked” indicator Shows the current time, unless the simple or Auto Off timer is set. If the simple or Auto Off timer is set, shows the time remaining.
3. Screen Configuration Set Day/Time Function Selection of remote controller TIME SUN A D C Standard Control Screens ˚F˚C ˚C OFF ON B C Timer Monitor Timer Setup MON SUN MON TUE WED THU FRI SAT TIMER OFF B ˚F˚C WEEKLY WEEKLY For details on setting the language for the remote controller display, refer to section 8. Function Selection. The initial language setting is English.
. Operation 5.2. Mode select 5.3. Temperature setting ■ Press the operation mode ( tion mode 2. s ) button 2 and select the opera- Cooling mode Drying mode s To decrease the room temperature: button 3 to set the desired temperature. Press The selected temperature is displayed 3. s To increase the room temperature: Press button 3 to set the desired temperature. The selected temperature is displayed 3.
. Timer 6.1. For Wired Remote-controller You can use Function Selection of remote controller to select which of three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. 6.1.1. Weekly Timer ■ The weekly timer can be used to set up to eight operations for each day of the week. • Each operation may consist of any of the following: ON/OFF time together with a temperature setting, or ON/OFF time only, or temperature setting only.
6. Timer Press the Timer On/Off button 9 so that “Timer Off” appears at 0. TIME SUN ˚C ˚C 0 WEEKLY Press the Timer On/Off button 9 so that the “Timer Off” indication (at 0) goes dark. TIME SUN ˚C ˚C 0 WEEKLY 6.1.2. Simple Timer ■ You can set the simple timer in any of three ways. • Start time only: The air conditioner starts when the set time has elapsed. • Stop time only: The air conditioner stops when the set time has elapsed.
6. Timer Examples If ON and OFF times have both been set at the simple timer, operation and display are as indicated below. Example 1: Start the timer, with ON time set sooner than OFF time ON Setting: 3 hours OFF Setting: 7 hours Hr ON AFTER At Timer Start SIMPLE Display shows the timer’s ON setting (hours remaining to ON). ▲ At 3 hours after timer start Hr AFTER OFF ˚C ˚C SIMPLE Display changes to show the timer’s OFF setting (hours remaining to OFF).
7. Other Functions 7.1. Locking the Remote Controller Buttons (Operation function limit controller) ■ If you wish, you can lock the remote controller buttons. You can use the Function Selection of remote controller to select which type of lock to use. (For information about selecting the lock type, see section 8, item [4]–2 (1)). Specifically, you can use either of the following two lock types. 1.
8. Function Selection Function selection of remote controller The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed. Item 2 Item 1 Item 3 (Setting content) 1. Change Language (“CHANGE LANGUAGE”) Language setting to display • Display in multiple languages is possible 2.
8. Function Selection [Function selection flowchart] Setting language (English) Normal display (Display when the air condition is not running) Hold down the E button and press the D button for 2 seconds. E Press the operation mode button. G Press the TIMER MENU button. D Press the TIMER ON/OFF button. Hold down the E button and press the D button for 2 seconds. Remote controller function selection mode Item1 G Change Language Item2 Dot display English G Germany E F Spanish TEMP.
8. Function Selection [Detailed setting] [4]–1. CHANGE LANGUAGE setting The language that appears on the dot display can be selected. • Press the [ MENU] button G to change the language. 1 English (GB), 2 German (D), 3 Spanish (E), 4 Russian (RU), 5 Italian (I), 6 Chinese (CH), 7 French (F), 8 Japanese (JP) Refer to the dot display table. [4]–2. Function limit (1) Operation function limit setting (operation lock) • To switch the setting, press the [ ON/OFF] button D.
8.
9. Care and Cleaning ˚C ˚C FILTER TEMP. ON/OFF ■ Indicates that the filter needs cleaning. Clean the filter. ■ When resetting “FILTER” display When the [FILTER] button is pressed two times successively after cleaning the filter, the display goes off and is reset. Note: ● When two or more different types of indoor unit are controlled, the cleaning period differs with the type of filter. When the master unit cleaning period arrives, “FILTER” is displayed.
10. Trouble Shooting Having trouble? Air conditioner operates without the ON/OFF button being pressed. Air conditioner stops without the ON/OFF button being pressed. Remote controller timer operation cannot be set. “PLEASE WAIT” appears in the remote controller display. An error code appears in the remote controller display. Draining water or motor rotation sound is heard. Noise is louder than specifications. Here is the solution. (Unit is operating normally.
Please be sure to put the contact address/telephone number on this manual before handing it to the customer. HEAD OFFICE: MITSUBISHI DENKI BLDG.
