ENGLISH INTERACTIVE PEN MODEL Contents ESPAÑOL Safety precautions ......................2 Using precautions .......................3 Introduction .................................6 What’s included in the box ..........6 Overview......................................6 Preparations ................................7 Operation.....................................8 Troubleshooting .........................11 Specifications ............................
Safety precautions WARNING: When you use the interactive pen, be sure to put the strap on your wrist. Do not wave the interactive pen with the strap put on your wrist. If the strap is not used properly, the interactive pen may slip from your hand and hit other people, resulting in injury. Even when the strap is put on your wrist, if you wave the interactive pen, the strap may be cut and the interactive pen may hit other people, resulting in injury.
Using precautions Using this interactive pen may cause damage to the screen surface depending on the screen used. In such a case, replace the screen with that having a solid surface. When using the device in Europe: COMPLIANCE NOTICE This device complies with the requirements of the EC Directive 1999/5/EC “R&TTE Directive”.
Using precautions (continued) For the U.S. and Canada only: COMPLIANCE NOTICE OF FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The wireless function of this device can be used only in Austria, Bulgaria, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Norway, Poland, Portugal, Romania, Slovakia, Spain, Sweden, Switzerland, Ireland, United Kingdom, Belgium, Netherlands, Luxembourg, Slovenia, Cyprus, Estonia, Iceland, Latvia, Lithuania, and Malta. This function cannot be used legally in countries other than the above.
Introduction Using this interactive pen, you can perform the operation of the computer such as drawing a line or clicking a button while projecting the image supplied from the computer. Important: • The interactive pen runs on the Windows XP, Windows Vista, and Windows 7 operating systems only, not on Mac OS operating system software. • Use a personal computer recommended by the application software to use the interactive pen.
ENGLISH Preparations Installing the batteries to the interactive pen Preparation: Check that the power switch is turned OFF. 1. Push down the cover of the battery holder ( ), and then pull out the battery holder ( ). 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Use two R03 (size-AAA) batteries. • Load the batteries from - spring side, and make sure to set them tightly. 3. Close the cover.
Operation When operating the interactive pen, see also the manuals supplied with the projector and the computer. Preparation: • Connect the projector to the computer using the USB cable supplied with the projector. • Configure the settings for using the interactive pen in the menu of the projector. • Project the image supplied from the computer. Pen tip L button R button P (pairing) button Power switch BATTERY indicator LINK indicator 1. Turn the power switch to ON.
ENGLISH How to hold the interactive pen Hold the interactive pen in the similar way as you hold a normal pen or a remote control. Holding like a pen (when you operate the personal computer by pushing the pen tip to the screen) Important: • Push the pen tip diagonally to the screen. When you Don’t hold around this area. push the pen tip vertically to the screen, lines may not be drawn smoothly. Correct Incorrect • Project images on a whiteboard or screen having sufficient hardness.
Operation (continued) Indicators The condition of the interactive pen is notified by the illumination status of the BATTERY and LINK indicators. • When the pairing isn’t set BATTERY Off LINK Blinking red (repeating “blinks twice in 0.5 second and goes off for 0.5 second”) Condition Searching the projector that can be operated with the interactive pen Interactive pen is in operation.
Before asking for repair of the interactive pen, check the following. Problem The interactive pen doesn’t work at all or it works intermittently. Solution • Make sure that the interactive pen isn’t pointing at a shadow and its tip isn’t in a shadow. • Turn off the power of the interactive pen once, and after a few seconds, turn it on again. • Set Interactive Mode in the Interactive Pen menu on the projector to Off and then set it to On again.
Specifications The specifications and outside appearance are subject to change without prior notice. Operation frequency Operation temperature Operation humidity Power consumption Dimensions (L x W x H) Weight EN-12 2.4 GHz ISM band 5°C - 35°C 30% - 90% 0.
MEMO
Mitsubishi Projector Warranty, Sales Support and Service Information North America MEVSA (Mitsubishi Electric Visual Solutions America, Inc.) Presentation Products Division 9351 Jeronimo Road Irvine CA 92618, USA For Warranty Registration, visit: http://www.mitsubishi-presentations.com under Customer Care Sales & Inquiries Phone :Toll Free (888)307-0349 E-mail :ppdinfo@mdea.com Technical Inquiries Phone :Toll Free (888)307-0309 E-mail :TSUPPORT@mdea.com MESCA (Mitsubishi Electric Sales Canada Inc.
