Indoor Service Manual

OPERATING PROCEDURE PHOTOS/FIGURES
1. Removing the filter
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1.)
(2)
Pull down the lever of the air intake grille to remove the
filter. (See Figure 2.)
Figure 1
2. Removing the air intake grille
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1.)
(2) Remove the hook of drop prevention strap from the
panel.
(3) Remove the air intake grille.
Figure 2
3. Removing the electrical box cover
(1) Remove the air intake grille and the filter. (Refer to
procedure 2.)
(2) Loosen the 2 electrical box cover fixing screws (M4×10)
approximately 2 to 3 mm. (See Photo 1.)
(3) Slide the electrical box cover toward the arrow to remove.
(See Photo 2.)
Photo 1
Photo 2
Knob
Electrical box cover
Electrical box cover
xing screws
Hook of drop
prevention strap
Slide
Intake grille
Filter
Grille
Air intake grille
39
OCH640D
12
DISASSEMBLY PROCEDURE
Be careful when removing heavy parts.
PLA-A12EA7 PLA-A18EA7 PLA-A24EA7
PLA-A30EA7 PLA-A36EA7 PLA-A42EA7