Engineering Manual

Wi-Fi Adapter
PAC-USWHS002-WF-1
Specications
Descriptions
Applicable Models
Allows for a Mitsubishi Electric indoor unit to communicate
with to the kumo cloud
TM
app and web.
SLZ-KA09/12/15NA
SEZ-KD09/12/15/18NA4
MVZ-A09/12/15/18/24AA4
PKA-A12/18HA7
PKA-A24/30/36KA7
PCA-A24/30/36/42KA7
PLA-A12/18/24/30/36/42EA7
PEAD-A12/18/24/30/36/42AA7
PVA-A12/18/24/30/36/42AA7
MSZ-FH06/09/12/15NA
MSZ-FH18NA2
MSZ-EF09/12/15/18NAW(B)(S)
MSZ-GL06/09/12/15/18/24NA
MSZ-D30/36NA
MSY-GL09/12/15/18/24NA
MSY-D30/36NA
MFZ-KJ09/12/15/18NA
Input Voltage DC12.7V (from indoor unit)
Power consumption MAX 2W
Size W×H×D (mm,inch)
17.526×46.228×74.168, 0.69×1.82×2.92
RF channel 1ch ~ 11ch
Usgae environment Temperature 32 ~ 104°F (0 ~ 40°F)
About Wireless Interface
Photo
Connecting the Wireless Interface
This Wireless Interface will communicate status information and control the connected air conditioner.
• Some room air conditioners are not compatible with the Wireless Interface.
Make sure that the room air conditioner is compatible with the Wireless Interface before attempting to install the Wireless Interface.
Note: Installation should be conducted by a professional installer.
● Turn off and verify the power has been disconnected to the complete air-conditioning system
● Dismantle the indoor unit in accordance with the service manual and locate CN105 on the main control PCB
● Connect the cable on the PAC-USWHS002-WF-1 to the CN105 connector on the indoor unit
● PAC-USWHS002-WF-1 may be attached on or in close vicinity to the indoor unit. Attach one strip to the PAC-USWHS002-WF-1 and the other to the installation site.
Align the strips and press to securely attach the PAC-USWHS002-WF-1 to the installation site.
● Start up: Refer to the PAC-USWHS002-WF-1 Install guide located at
https://meus.mylinkdrive.com/item/PAC-USWHS002-WF-1.html.
196