User`s manual

2 - 2 2 - 2
MELSEC-Q
2 SYSTEM CONFIGURATION
(4) Compatibility with online module change
To make an online module change, use the module of function version C or later.
POINT
The products of function version C include the functions of the products of function
versions A and B.
(5) Software packages supported
Correspondence between systems which use D/A converter modules and
software packages are as shown below.
The GX Developer is necessary when using a D/A converter module.
Software Version
GX Developer
GX Configurator-DA
4
Single PLC system Version 7 or later
Q00J/Q00/Q01CPU
Multiple PLC
system
Version 8 or later
Version 1.10L or later
(cannot be used with the
SW0D5C-QDAU-E 60G
or earlier versions).
Single PLC system Version 4 or later
SW0D5C-QDAU-E 00A
or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple PLC
system
Version 6 or later
SW0D5C-QDAU-E 20C
or later
Single PLC system
Q12PH/Q25PHCPU
Multiple PLC
system
Version 7.10L or later
Version 1.13P or later
(cannot be used with the
SW0D5C-QDAU-E 60G
or earlier versions).
If installed in a MELSECNET/H
remote I/O station
Version 6 or later
SW0D5C-QDAU-E 50F
or later
4 Refer to Appendix 1.2 for the combinations of the D/A converter module functions and GX
Configurator-DA software versions.
When using the Q68DAV or Q68DAI, use SW0D5C-QDAU-E 60G or later.
2