User`s manual

3 - 38
3.5.6 Convenient functions for editing data
3 OPERATING INTELLIGENT FUNCTION MODULES
GX Works2
■ Block start copy
Utilize specified block start data to another axis or block on the block start data setting screen.
Operating procedure
1. Select [Edit] ⇒ [Block Start Copy].
The Block Start Copy screen is displayed.
The screen image below is an example when the operation is performed on the data of QD75P4.
2. Specify the axis or block number of the copy destination, and click the button.
The block start copy is executed.
■ Editing M code comments
Set comments to the M code, which is required for synchronizing with the positioning control, on the
positioning data setting screen. M code comments are saved only within the project.
Operating procedure
1. Select [Edit] ⇒ [M Code Comment Edit].
The M Code Comment Edit screen is displayed.
2. Set the items on the screen.
3. Click the button.
M code comments are set.
Item Description
M Code
Enter M code numbers within the range from 1 to 65535.
A maximum number of M code comments that can be set is 50.
M Code Comment Enter M code comments.