User`s manual

3.5.7 Saving/reading data of positioning module
3 - 45
3.5 QD75/LD75 Positioning Module
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
3.5.7 Saving/reading data of positioning module
Save the data of positioning module set with GX Works2. Also, read the data of positioning module
from the saved file, and update the data of positioning module on a project.
Use this operation to utilize only the data of positioning module from a GX Works2 project.
The parameter, positioning data, block starting data, servo parameter data of the QD75/LD75
positioning module can be saved/read.
■ Saving data of positioning module
Save the data of positioning module to a file.
Operating procedure
1. Select a positioning module to be saved to a file from the Project view.
2. Select [Project] ⇒ [Intelligent Function Module] ⇒ [Save the Positioning Module
Data].
The Save the Positioning Module Data screen is displayed.
3. Enter a name of the file to be saved, and click the button.
The data of positioning module is saved in the save destination.