User`s manual

3 - 46
3.5.7 Saving/reading data of positioning module
3 OPERATING INTELLIGENT FUNCTION MODULES
GX Works2
■ Reading data of positioning module
Read the data of positioning module from a file, and update the data of positioning module on an open
project.
Operating procedure
1. Select a positioning module to which the data of positioning module is updated
from the Project view.
2. Select [Project] ⇒ [Intelligent Function Module] ⇒ [Read from the Positioning
Module Data].
The Read from the Positioning Module Data screen is displayed.
3. Select a file name, and click the button.
The Select Data to Read screen is displayed.
4. Check the data of positioning module to be read, and select the button.
The following message is displayed.
5. Click the button.
The data of positioning module selected on the Project view is overwritten.
● Reading applicability by module model
For QD75M/QD75MH, data can be read only when the module from which data is read and the module selected
on the Project view are the same model.
For the QD75/LD75 positioning module other than QD75M/QD75MH, data can be read from the modules whose
number of axes is same, even when the module from which data is read and the module selected on the Project
view are the different model.