User`s manual

4 - 2
4 PREDEFINED PROTOCOL SUPPORT FUNCTION
GX Works2
4.1 List of Functions of Predefined Protocol Support Function
This section shows the list of functions of the predefined protocol support function.
File Reference
New Create a new protocol setting file. Section 4.5.1
Open Open an existing protocol setting file. Section 4.5.2
Close Close an open protocol setting file. Section 4.5.4
Save Save a protocol setting file.
Section 4.5.3
Save As Name and saves a protocol setting file.
Print Print a protocol setting etc. Section 4.10
Exit Exit the predefined protocol support function. Section 4.3
Edit Reference
Add Protocol Add a protocol. Section 4.6.1
Change to Editable Protocol
Change a protocol selected from the predefined protocol library to an
editable one.
Section 4.6.2
Protocol Detailed Setting
Configure the number of retries of a protocol and whether to clear OS
area (receive data area) before protocol execution etc.
Section 4.6.3
Add Receive Packet Add a receive packet. −
Delete Delete a protocol. Section 4.6.5
Copy Copy a protocol.
−
Paste Paste a protocol.
Delete Multiple Protocols Batch-delete multiple protocols.
Copy Multiple Protocols Batch-copy multiple protocols.
Paste Multiple Protocols Batch-paste multiple protocols.
Device Batch Setting Batch-set devices used in a protocol. Section 4.7.4
Save User Protocol Library Save the protocol being set as a user protocol library. Section 4.6.6
Module Read/Write Reference
Read from Module Read protocol settings from a module.
Section 4.8.1
Write to Module Write registered protocol settings to a module.
Module Verification Compare protocol settings being opened with those written in a module. Section 4.8.2
Tool Reference
Setting Device List Display the list of devices used in protocols. Section 4.7.5
Register Predefined Protocol Library
Import the predefined protocol library provided by Mitsubishi Electric
Corporation.
Section 4.6.7
Debugging Support Function Reference
Module Selection Select a module to be debugged. Section 4.9.1
Protocol Execution Log Display the protocol execution logs and the protocol execution results. Section 4.9.2
State Monitor
Monitor signals, communication error information, operation setting
switches, and protocol execution status of the Q series C24N/L series
C24 module.
Section 4.9.3
Window Reference
Cascade Tile windows in overlapping display.
−Tile Horizontally Tile windows horizontally.
(Switch to other window) Display the open window.