User`s manual

4.5.2 Opening files
4 - 9
4.5 File Operations of Predefined Protocol Support Function
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
4.5.2 Opening files
Read a protocol setting file saved in the hard disk or other memory media of a personal computer.
Operating procedure
1. Select [File] ⇒ [Open] ( ).
The Open screen is displayed.
2. Select a protocol setting file (*.pcf) and open the file.
The Protocol Setting screen is displayed.
4.5.3 Saving files
Save a protocol setting being edited in the hard disk or other memory media of a personal computer.
■ Saving protocol settings under the specified name
Save a protocol setting being edited under the specified name.
Operating procedure
1. Select [File] ⇒ [Save As].
The Save As screen is displayed.
2. Set "Save in" and "File name" and save the file.
The file is saved with the specified name and in the specified destination.
■ Saving protocol settings
Overwrite and save a protocol setting being edited.
Operating procedure
• Select [File] ⇒ [Save] ( ).
The data to be saved is overwritten on the existing protocol setting file.
4.5.4 Closing files
Close a protocol setting being opened.
Operating procedure
• [File] ⇒ [Close].