User`s manual

4 - 19
4.7 Setting Packets
1
OVERVIEW
2
COMMON OPERATIONS FOR INTELLIGENT FUNCTION MODULES
3
OPERATING INTELLIGENT FUNCTION MODULES
4
PREDEFINED PROTOCOL SUPPORT FUNCTION
A
APPENDIX
I
INDEX
4.7 Setting Packets
Set packet elements of a registered protocol.
Screen display
Click a desired packet setting on the Protocol Setting screen.
Operating procedure
• Set the items on the screen.
Item Description
Protocol No. Display the protocol number of the specified protocol.
Protocol Name Display the protocol name of the specified protocol.
Packet Type Display 'Send Packet' or 'Receive Packet' as the type of the specified packet.
Packet Name
Set the packet name of the specified packet.
*1
Packet No.
(Receive packet only)
Display the packet number of the receive packet.
Element
List
Element No.
Display the number of the packet element.
The element number can be changed by selecting a number from the list.
Element Type
Display the type of each element.
For details, refer to the user's manual of the module.
Element Name Display the name of each element.
Element Setting
Display the setting outline of each element.
For details, refer to "■ Display examples of element settings" in this section.
Display contents may vary depending on types of elements.
To display the respective setting screen, click an editable cell
*2
, or press the
key.
*1 : Not editable for a protocol selected from the predefined protocol library.
*2 : Displayed in red when a Variable unset error, Element error, or Calculating range error occurs, and
displayed in blue when no error occurs.
Header
Conversion
Variable
Static
Data
Check
Code
Terminator
Data division
Up to 32 elements can be allocated
Conversion
Variable
Header
Conversion
Variable
Static
Data
Check
Code
Terminator
Data division
Up to 32 elements can be allocated
Conversion
Variable